So basicly when i turn on my computer that has a msi B150A motherboard it says exit flash mode right in begining and then it enters the bios and after that i cant move my mouse or keyboard
I dont think i have the jumper in my motherboard as i never found any video on the same motherboard i am using
Theres always a clear cmos jumper, labelled JBAT1, its just above your 2nd PCI-e x16 slot, see page 36 of your manual or the screen shot below, use a car key or flat head screwdriver to short the 2 pins for approx 10 seconds with the power off, then try again.
So basicly when i turn on my computer that has a msi B150A motherboard it says exit flash mode right in begining and then it enters the bios and after that i cant move my mouse or keyboard
Have you tried clearing the bios, use the jumper on the motherboard.
I dont think i have the jumper in my motherboard as i never found any video on the same motherboard i am using
Theres always a clear cmos jumper, labelled JBAT1, its just above your 2nd PCI-e x16 slot, see page 36 of your manual or the screen shot below, use a car key or flat head screwdriver to short the 2 pins for approx 10 seconds with the power off, then try again.
Also your stick of ram is in the wrong slot, it should be in the slot ive marked in red in the same picture above as per the instructions, Dimm2 http://imgur.com/NP8zU50