Setting up a new pc with the following spec:
Gigabyte AORUS GA-AX370-Gaming 5
Ryzen 5 1600x clocked to 4ghz
Corsair h60
2x sp120 performance
Vengeance LPX 2x 8gb
Gigabyte gtx 1080 gaming 1
Corsair mx750i
Nzxt H440
Will have the front as intake and the back and top as outtake. Maybe push-pull on the radiator and keep 1 top fan slot free
Now are my following question.
1. Should I put 2 of the stock front fans on the top and the Sp120 at the front
2. H60 as push or pull, don't have a lot of drives so thinking of putting it as push at the top most forward to the front
3. To control the fans can I use an Y cable 2 way splitter or can I use a 4 way splitter as wel to connect it to the mobo. I know the mobo has a lot of 4 pin connections, but want to try to keep the cables to the mobo to a bare minimum. But I don't want to spent extra money on a fan controller just yet.
Any suggestions are welcome
P.s. This is my first full build..
Gigabyte AORUS GA-AX370-Gaming 5
Ryzen 5 1600x clocked to 4ghz
Corsair h60
2x sp120 performance
Vengeance LPX 2x 8gb
Gigabyte gtx 1080 gaming 1
Corsair mx750i
Nzxt H440
Will have the front as intake and the back and top as outtake. Maybe push-pull on the radiator and keep 1 top fan slot free
Now are my following question.
1. Should I put 2 of the stock front fans on the top and the Sp120 at the front
2. H60 as push or pull, don't have a lot of drives so thinking of putting it as push at the top most forward to the front
3. To control the fans can I use an Y cable 2 way splitter or can I use a 4 way splitter as wel to connect it to the mobo. I know the mobo has a lot of 4 pin connections, but want to try to keep the cables to the mobo to a bare minimum. But I don't want to spent extra money on a fan controller just yet.
Any suggestions are welcome
P.s. This is my first full build..
Facebook
Twitter
Instagram