Upgrading my motherboard?

Imnotgoodatcomputers

Commendable
Dec 4, 2016
83
0
1,640
Here are the specs
Intel Core i5 6600k 3.5 gigahertz
Gigabyte Geforce GTX 1060
Seasonic 80+ Certified Bronze 550 W PSU
H110M Pro-D Mother Board
Case : CoolerMaster Elite 431 Black / Blue Mid-Tower Gaming Case

I'm just looking to get a better motherboard that's compatible with my specs above. Thanks for helping me out!
 
Solution

The only valid reason for getting...

Imnotgoodatcomputers

Commendable
Dec 4, 2016
83
0
1,640

I was not going to be overclocking, I wanted to upgrade to a new board so I can eventually upgrade my specs in the future.

 

You shouldn't have any trouble using a z170 motherboard with the 6600K. It would also let you overclock your CPU when and if you ever need it.
 
Frankly, given your components at this time, including your present motherboard, it's difficult to see ANY need for purchasing a new motherboard at this point-in-time. I'm assuming, of course, that your present system boots without incident and functions problem-free.

It's hard to see how a Z170 motherboard would improve your system's performance to any significant degree and it seems to me it makes little sense to "upgrade" to a new motherboard on the basis that "eventually" you would "upgrade your specs". If & when you substantially purchase new components, especially a significantly higher-end CPU, then you would consider "upgrading" to a new motherboard (and perhaps other components as well).
 

The only valid reason for getting the Z170 board is to allow the OP to,should he want to, overclock his 6600K CPU. An overclocked CPU can delay the need to upgrade to a whole new system, sometimes by several years.

 
Solution

Richard_253

Prominent
May 28, 2017
19
0
520


If you are running Windows keep in mind that swapping out your motherboard will require that you purchase a new Windows license.
 

Imnotgoodatcomputers

Commendable
Dec 4, 2016
83
0
1,640


I want a motherboard that can be capable of upgrading my components in the future, when I have the time and money to upgrade my components. I have no problem in booting my PC.
 

Imnotgoodatcomputers

Commendable
Dec 4, 2016
83
0
1,640


I don't like MicroATX boards, I would prefer regular Mid Size ATX Boards. But I'll check it out anyway thanks !
 


It's your money, of course, and if that's the route you want to take, so be it.

But in my opinion it makes absolutely no sense to "upgrade" your present system at this time - let alone with a Z170 motherboard - given the present state of your system together with your specific intention that you plan to upgrade your components "in the future when (you) have the time and money to upgrade (your) components."

When that "future time" arrives, THEN you should consider "upgrading" your system. I can guarantee it WON'T be with a Z170 system.

But as the man said a long time ago..."yer pays yer muny an' yer makes yer cherce".
 


Why can't you upgrade components using your current motherboard? I don't think you are thinking this through very well. There is nothing you can upgrade on a new motherboard that you can't on your current one since whatever you replace it with will have to still be usable with your CPU. That means it will be the exact same socket and most of the connections.

You will just be wasting your money and time doing this.

If you want to do SLI in the future or use more RAM sticks, sure. But instead of SLI it is often better to just buy a new faster single video card and for RAM, two 8 GB sticks will be plenty to use till your CPU is not fast enough to run things.
 



that would be the case if the OP is using a version of windows older then windows 10

 

Richard_253

Prominent
May 28, 2017
19
0
520


Actually it applies to Windows 10 which uses the MB to validate the license.
 


https://www.windowscentral.com/how-re-activate-windows-10-after-hardware-change

 

Richard_253

Prominent
May 28, 2017
19
0
520


Good to know. Thanks for sharing.