My pc won't display on my screen now

Toggle sidebar Toggle sidebar
R

Reidm27

Prominent
Jun 15, 2017
2
0
510
I just built my pc with Ryzen 1600 and b350 mate mobo. I had a 3200 MHz ram installed and it was only reading at 2133 so I overclocked the ram to 3200. Now my pc won't display anything on my screen. Please help me
 
Solution
Ironsounds
Hello... remove your MB battery and do a CMOS clear/reset... to clear your 'New/Bad" ram setting... it will search for a "good" RAM setting on the next boot.
Sort by date Sort by votes
S

schaft

Distinguished
Jan 24, 2012
545
0
19,360
You should try manual reset on the motherboard.

If there is none (do at your own risk, although it should be safe), then you should try take out the motherboard battery and ram, turn it on without power (to deliberately use up all the power left in the memory). Put the battery and memory back. It should go back to basic setting.

Good luck
 
Upvote 0 Downvote
Ironsounds

Ironsounds

Champion
Jul 31, 2011
10,403
4
56,960
Hello... Well take smaller steps... and see where it hangs at... would be the best approach. B / it's a very fast "digital communication channel(s). Your CPU/MB/RAM will only work with certain settings together. Sometimes you need to increase the voltage to the RAM to go higher... What did the MB/CPU/Ram boot at after the clear?
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom