Old Build: M5A97 MemOK Led flashing, no display,

Toggle sidebar Toggle sidebar
E

ehVonte

Prominent
Jun 16, 2017
3
0
510
So I have a old build here that i'm trying to getting running again. When i turn it on the MemOK led flashes red and doesn't stop. also theirs no display or post.

I've already tried a new cpu that just came in today. tried putting the ram in a different slot. used a different video card. cleared cmos.
I am out of ideas here.

Specs
Motherboard: M5A97
PSU: ATX IB680W
Video Card: GTX 570
Ram: G Skill Sniper DDR3
CPU: was a FX-4100 but now have a FX-4300.

 
Solution
C
Review of APEVIA ICEBERG ATX-IB680W-BL when it was called Aspire Beast 680 basically the same PSU.
http://www.jonnyguru.com/modules.php?name=NDReviews&op=Story&reid=78

Looks like a low grade power supply with most wattage on +3.3V and +5V and not enough on +12v. You would be lucky if it could power up a GTX 570 which requires a minimum of 550 watts. Review of power supply concludes "NOT a 680W! Very deceptive. A 550W at best."

If you have memory problem, MemOK Led flashing, I suggest you list memory part number or link to the memory.
Sort by date Sort by votes
C

Calvin7

Titan
Feb 19, 2013
11,725
334
76,490
Review of APEVIA ICEBERG ATX-IB680W-BL when it was called Aspire Beast 680 basically the same PSU.
http://www.jonnyguru.com/modules.php?name=NDReviews&op=Story&reid=78

Looks like a low grade power supply with most wattage on +3.3V and +5V and not enough on +12v. You would be lucky if it could power up a GTX 570 which requires a minimum of 550 watts. Review of power supply concludes "NOT a 680W! Very deceptive. A 550W at best."

If you have memory problem, MemOK Led flashing, I suggest you list memory part number or link to the memory.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom