This has three parts to it.
1.So today I bought the Ryzen 7 1700x chip and tried booting it up but it either takes a long time or doesn't boot at all.While it boots up it goes straight to the windows login and I can't even access my bios.
Specs
Cpu-Ryzen 1700x
Mobo-Msi x370 sli plus
Cooler-Corsair hd60 water
Ram Gs kill ripjaws v 2×(4gb)
Psu-Evga 750W Gold
Gpu-Sapphire stock Rx480/Red Devil powercolor rx570/Rx580(I tried each one separately and two at a time)
Hdd-7200 rpm 1Tb WD
While booting up it shows the CPU debug then vga debug and then constantly shows the gpu led light on.I tried refitting all the parts and components i have the same issue.
Previous build
Cpu-Fx 6300
Mobo-Gigabyte ga970-ud3p
Cooler-Hyper 212 Evo
Ram-Ballistic 2×(8)
Psu-same as above/Evga 430W
Gpu-Any
Hdd-Same as above.
2.After I had removed the previous build I forgot to format my hdd and let the Ryzen boot up with the previous windows as I didn't have a spare hdd.Is my motherboard dead because of that or is it a gpu thing?
3.I tried booting up my previous system but I didn't have a spare hdd therefore I used the same one with windows 10 from Ryzen installed now my fx6300 won't boot up.It crashes after booting with no post.
I dont know what the problem is and now i have two almost complete builds which wont boot up.
1.So today I bought the Ryzen 7 1700x chip and tried booting it up but it either takes a long time or doesn't boot at all.While it boots up it goes straight to the windows login and I can't even access my bios.
Specs
Cpu-Ryzen 1700x
Mobo-Msi x370 sli plus
Cooler-Corsair hd60 water
Ram Gs kill ripjaws v 2×(4gb)
Psu-Evga 750W Gold
Gpu-Sapphire stock Rx480/Red Devil powercolor rx570/Rx580(I tried each one separately and two at a time)
Hdd-7200 rpm 1Tb WD
While booting up it shows the CPU debug then vga debug and then constantly shows the gpu led light on.I tried refitting all the parts and components i have the same issue.
Previous build
Cpu-Fx 6300
Mobo-Gigabyte ga970-ud3p
Cooler-Hyper 212 Evo
Ram-Ballistic 2×(8)
Psu-same as above/Evga 430W
Gpu-Any
Hdd-Same as above.
2.After I had removed the previous build I forgot to format my hdd and let the Ryzen boot up with the previous windows as I didn't have a spare hdd.Is my motherboard dead because of that or is it a gpu thing?
3.I tried booting up my previous system but I didn't have a spare hdd therefore I used the same one with windows 10 from Ryzen installed now my fx6300 won't boot up.It crashes after booting with no post.
I dont know what the problem is and now i have two almost complete builds which wont boot up.