I recently bought Gigabyte GTX 1050 Ti G1 Gaming 4GB. The graphic card only have 1x DVI-D, 3x HDMI, and 1x Displayport while my monitor only have VGA output that only support 1366x768 resolution.So I decided to use DVI-D to VGA active adapter brand Towel. So I installed a clean Windows 10 pro and it went well on monitor but I can't change the resolution 800x600. So I updated to the latest Nvidia drivers version 382.53. But after the installation the screen become black for long time so restarted the PC. After the BIOS loading it gone black. I can enter BIOS but cannot enter Windows 10. I tried HDMI cable on my TV and it appears normally. I checked the Nvidia drivers have been installed. i tried changed the resolution on TV to 1366x768 @60Hz then unplugged the HDMI and tried on my monitor but still black screen.
Here my system spec :
CPU : AMD FX 6300 3.5 Ghz
MOBO : ASUS M5A97 R2.0 BIOS version 2603
RAM : Kingston HyperX Fury 2x4GB(8GB) 1600MHz DDR3
GPU : Gigabyte Geforce GTX 1050 Ti G1 Gaming 4GB DDR5
PSU : CORSAIR CX650M
SSD : Micron RealSSD C400 64GB
HDD : WD Blue 1TB 7200RPM
Any solutions?
Here my system spec :
CPU : AMD FX 6300 3.5 Ghz
MOBO : ASUS M5A97 R2.0 BIOS version 2603
RAM : Kingston HyperX Fury 2x4GB(8GB) 1600MHz DDR3
GPU : Gigabyte Geforce GTX 1050 Ti G1 Gaming 4GB DDR5
PSU : CORSAIR CX650M
SSD : Micron RealSSD C400 64GB
HDD : WD Blue 1TB 7200RPM
Any solutions?