Im getting a new graphics card (gtx 1050ti

Patryk_12

Reputable
Jun 13, 2017
164
1
4,685
Im getting a new graphics card (gtx 1050ti), but i have no idea of how to put it in the case, Can someone please guide me step by step of how should i do it?
 
Solution
make sure the power supply will take the wattage of the gpu and has the power plugs needed.
also check the inside spec for gpu length make sure it not going to hit anything like hard drive bay.
also make sure if it more then one slot wide it wont hit anything. when you get the new card in and going to install it start with turnign the pc off and unplugging it from the wall some mb will hold power and you cna short the mb out. open the case and dry fit the gpu. dont try push it into the pci slot at this time. just line it up and see what io shield have to be removed for the gpu. pop those out. then push in the gpu make sure the video slot latch locks. then screw the card in. connect power to the gpu. with the case open power the pc up...
make sure the power supply will take the wattage of the gpu and has the power plugs needed.
also check the inside spec for gpu length make sure it not going to hit anything like hard drive bay.
also make sure if it more then one slot wide it wont hit anything. when you get the new card in and going to install it start with turnign the pc off and unplugging it from the wall some mb will hold power and you cna short the mb out. open the case and dry fit the gpu. dont try push it into the pci slot at this time. just line it up and see what io shield have to be removed for the gpu. pop those out. then push in the gpu make sure the video slot latch locks. then screw the card in. connect power to the gpu. with the case open power the pc up with video cable on the gpu. make sure the gpu fans spin and pc posts. after it posts install the video drivers and then power down and close the case up.
 
Solution

Patryk_12

Reputable
Jun 13, 2017
164
1
4,685

THANK YOU