Advice on cooling setup

JackHinton

Honorable
Nov 23, 2016
29
0
10,530
Recently with the hot weather in the UK i have been experiencing high cpu and gpu temperatures under load. I had a look to see the current fan configuration in my pc (brought it pre built) to find that there is only 1 intake fan and no exhaust fans. I am purchasing 3 more fans now but don't know what to set each of them to (intake or exhaust) in each position. I am going to attach a photoshop'd image of a pc i found online showing the available fan positions. Green line means there are already fans there and the red ones are all the available places where fans can go. The current fans (shown in green) are both pulling from right to left. Please reply saying what fan should be intake or exhaust for example : Fan 3 = intake, Fan 5 = exhaust etc. I have heard it is best to have more intake than exhaust or an equal amount. THIS ISN'T MY PC, JUST ONE I FOUND ON THE INTERNET FOR A VISUAL REPRESENTATION

9df83c8308238d8d61827c81b50b9a98.png
 
Solution
That's a phanteks enthoo pro unless I'm mistaken. You have space for two large front 140 mm fans. I have the same one. I moved that front fan to position 4 as exhaust, to aid fan 5, and got a set of good aftermarket fans, something with a bit of power for the front. Noctua's fans are praised as best quality though they're pricey so only if you can afford them but you have plenty of cheaper options too. Do not put anything on 3. That would just suck the exhaust air of 4 back into the case, not to mention probably mess up the airflow but it won't hurt to test it out if you like, see what the temps are for yourself. Alternatively, you can get a liquid aio cooler for the cpu and then just stick it to the front or up top.

JackHinton

Honorable
Nov 23, 2016
29
0
10,530
My idea was to have fan 1 as intake along with fan 3, then have fan 4 and 5 as exhausts as the cool air is brought into the cpu fan from the top and bottom right and the hot air is exhausted out the top and the back. The thing that made me doubt this was that there may be hot air being taken in from the top where the hot air was exhausted. I might be wrong or there is a better way of doing it.
 
In general it is better to have more intake than exhaust, especially considering some GPU's will exhaust all or some of their air out the back as well.
Personally I would put another 1 in the front and probably not bother with the others and leave 5 as an exhaust.
 

SethJPC

Distinguished


Try it, then make 3 an exhaust and see if the CPU temperatures are better or worse.
Nothing wrong with negative air pressure, but you may have to clean out your PC of dust every so often.

 

JackHinton

Honorable
Nov 23, 2016
29
0
10,530


I would have done that but my case doesnt allow for another fan in the front, kinda stupid if you ask me, only having one front fan.
 

Sedivy

Estimable
That's a phanteks enthoo pro unless I'm mistaken. You have space for two large front 140 mm fans. I have the same one. I moved that front fan to position 4 as exhaust, to aid fan 5, and got a set of good aftermarket fans, something with a bit of power for the front. Noctua's fans are praised as best quality though they're pricey so only if you can afford them but you have plenty of cheaper options too. Do not put anything on 3. That would just suck the exhaust air of 4 back into the case, not to mention probably mess up the airflow but it won't hurt to test it out if you like, see what the temps are for yourself. Alternatively, you can get a liquid aio cooler for the cpu and then just stick it to the front or up top.
 
Solution

JackHinton

Honorable
Nov 23, 2016
29
0
10,530


For some reason i didn't think about just swapping them around and testing temps to find the best option. Thanks, lol.
 

JackHinton

Honorable
Nov 23, 2016
29
0
10,530


Thanks for the help, i should have made it clearer that this isn't my pc, i was using it for demonstration. Sorry about that, but thanks
 

JackHinton

Honorable
Nov 23, 2016
29
0
10,530

Thanks, you still gave me some useful info.