Oveclocked too much hd 6950

Hassaan Jamil · Jun 23, 2017

Hi, I have no display on my Graphics card after i overclocked it. It has display on the onboard card but no display on gpu. i think i overclocked it too much. Please help me i am rlly worried bout my card ,
my specs :
AMD athlon || x4 630 processor
4 gb ddr3 1800+
amd radeon hd 6950 1gb powercolor gddr5
power suppy 500w

update : can't get into the bios with the graphic card but can go in bios with onboard card

[two posts merged]

maxalge · Jun 23, 2017

Hassaan Jamil :

use the onboard and boot into windows with safe mode

uninstall the software you used to overclock, probably also a good idea to uninstall gpu drivers

install the card back, and hopefully you should be able to boot with it

Hassaan Jamil · Jun 23, 2017

OK, the important thing i forgot. I used ATiWINFLASH to flash a hd 6970 bios and heres the link :https://forums.overclockers.co.uk/threads/unlock-your-ati-6950-to-a-6970-thread.18221844/
I followed him and before i did this , i change the vga output something that was set to 560 mhz i changed it to 1000 mhz and flashed a new rom
after i flashed it i rebooted it and there was no display cpu was running fnas were spinning but nothing

maxalge · Jun 23, 2017

Hassaan Jamil :

bricked the card then

place the gpu in a secondary pcie slot, boot into windows with the onboard

then flash it back to stock bios

Hassaan Jamil · Jun 23, 2017

maxalge :

I do not have another pcie slot i have only 1 slot
when i try to flash it back with onboard graphics it say "cannot find descrete ati card" and my onboard graphics is ati radeon hd 4250

Hassaan Jamil · Jun 25, 2017

OK fixed it thank you for replies

Search

Oveclocked too much hd 6950

Hassaan Jamil

Prominent

Hassaan Jamil

maxalge

Champion

Hassaan Jamil

Prominent

maxalge

Champion

Hassaan Jamil

Prominent

Hassaan Jamil

Prominent

TRENDING THREADS

Latest posts

Moderators online

Share this page