Cryorig H7 Cooler performance with i5 4690 or i7 4790 ?

Mazatan

Reputable
Jul 27, 2015
75
1
4,545
Hi,

I want to replace the stock cooler of my i5 4690, the priority of the replacement is a quiet solution than the stock. Does anyone has any experience with the Cryorig h7 ?

My temps at idle are 40c and around 60's on load (gaming). Im planning to upgrade the cpu to an i7 4790 before the end of the year.
 
Solution
It's overkill for both, and should be very quiet. The H7 is an appropriate cooler for overclocked "K" CPUs and for use on CPUs with up to a 140w TDP, such as Intel's 6, 8, and 10 core chips.

EDIT: For what it's worth, 60's celsius is relatively cool for your current CPU. You could safely tweak your fan speed profile to let your CPU run 10-15c warmer and significantly cut down noise, without spending any money.
It's overkill for both, and should be very quiet. The H7 is an appropriate cooler for overclocked "K" CPUs and for use on CPUs with up to a 140w TDP, such as Intel's 6, 8, and 10 core chips.

EDIT: For what it's worth, 60's celsius is relatively cool for your current CPU. You could safely tweak your fan speed profile to let your CPU run 10-15c warmer and significantly cut down noise, without spending any money.
 
Solution

Mazatan

Reputable
Jul 27, 2015
75
1
4,545


Right now the speed profile is on quiet for the fans, I believe it hits 65c more or less when gaming, but I want to decrease the fan noise, the H7 should achieve the same temps or maybe lower with less fan noise, right ?
 
The stock intel cooler is adequate for non overclocked processors as you have shown.
I might think that if you get 40c. at idle, you cooler may nave not been mounted well.
I expect to see 10-15c. over ambient.
Check that all 4 pushpins are through the motherboard and locked.
Or, your case may not be supplying enough intake cooling air.
Under load, your temperatures are good. I would not worry about 75c.
At 100c. the cpu will slow down or shut off to protect itself.
The main problem for now is the noise that a 92mm fan makes under load.

Cryorig H7 uses a 120mm fan and will be a much more effective cooler, entirely suitable for a I7-4790K and an overclock.
The big advantage of the H7 is the compact 145mm height.
If you have 160mm available, look into the relatively unknown $35 scythe kotetsu.
I installed one in my son's I5-3570K with nice results.
Here is a review; it competes well with the hyper212 and even the noctua NH0U12s.
Particularly look at the noise vs. cooling stats.
http://www.silentpcreview.com/Scythe_Kotetsu

 

Mazatan

Reputable
Jul 27, 2015
75
1
4,545


The temps should be fine since the ambient temp is around 30C currently and the fans are at the minimum rpm, if I increase the rpm I could get the idle temps go down to 35C (but its loud to my taste) . The cooler is well mounted.

Sadly I have the core v1 and I cant use anything above 145mm. The h7 is at the limit hahaha just 1 or 2 mm of space left between the cover and the cooler.
 

Mazatan

Reputable
Jul 27, 2015
75
1
4,545


Dunno why the price of the M9i is the same as H7 here in my country, around 50 bucks for it. So I think the h7 is the choice to go if price is the same.

 
H7 seems to be the best by far.
A 120mm fan will be quieter.
The M9I uses a 92mm fan and it will need to run at higher rpm to generate sufficient airflow.
Tower type coolers tend to do a better job than downdraft coolers.
That is because they can more directly send the heated air out the back of a case.

Do pay attention to your case intakes.
Any cooler needs sufficient intake airflow to do its job.
 

Mazatan

Reputable
Jul 27, 2015
75
1
4,545


Thanks, currently I only have a 200mm fan on the front of the case.
 

Mazatan

Reputable
Jul 27, 2015
75
1
4,545


God point, I'll try to tweak my fan speed profile first and if Im not satisfied with it, I'll go with the H7.