Is this build good for 4K video editing?

Bardebay · Jun 27, 2017

Hello,
I have made a build and want to check with every one if is good enough.

B350M PRO-VDH
AMD Ryzen 5-1600 3.2GHz
16 gb ram
120gb Ssd with 1tb hdd
Cooler master psu 600w
Gtx 1050ti 4gb

Does any one have any suggestions for 4K editing build?

Thank you.

Ralston18 · Jun 27, 2017

What video editing software are you using? Or intend to use?

Key factor being the the recommended minimal hardware requirements set by the video editing software.

If your build matches or exceeds those requirements you should probably be okay.

Anything less than those requirements may be problematic.

What makes it difficult is that the "minimal requirements" may have been established in some ideal environment.

Meaning that in the real world "good enough" may require a higher, more powerful build.

However, start by checking the requirements for the editing software you are planning to use.

Match or exceed those requirements.

But also visit the software's website: Forum and FAQs if anyway. See what you can learn.

Read the User Guide/Manual for the software as well. The "fine print" may be very revealing.

Bardebay · Jun 28, 2017

Ralston18 :

What video editing software are you using? Or intend to use?

Key factor being the the recommended minimal hardware requirements set by the video editing software.

If your build matches or exceeds those requirements you should probably be okay.

Anything less than those requirements may be problematic.

What makes it difficult is that the "minimal requirements" may have been established in some ideal environment.

Meaning that in the real world "good enough" may require a higher, more powerful build.

However, start by checking the requirements for the editing software you are planning to use.

Match or exceed those requirements.

But also visit the software's website: Forum and FAQs if anyway. See what you can learn.

Read the User Guide/Manual for the software as well. The "fine print" may be very revealing.

Thank you.
I am thinking of using premiere pro 2017 with magic bullet.
Will it match?

madmatt30 · Jun 28, 2017

Yes solid setup.
The cm 600w PSU is a concern though simply because as far as I'm aware cooler master don't make a decent 600w model
If that's a b2 or thunder don't but it.

Bardebay · Jun 28, 2017

madmatt30 :

Sorry, I didn't quite understand what you are saying.

madmatt30 · Jun 28, 2017

What I'm saying is there isn't a really good quality 600w psu thats made by cooler master .
The GXM models which are decent are 550/650w.

If that PSU is a b600 its poor quality & I would buy something different.

The corsair cxm450 is ample for that build & is guarantees quality wise

Bardebay · Jun 28, 2017

madmatt30 :

Thank you.
How many watts do you think this build need?I don't want to waste too much electricity.

madmatt30 · Jun 28, 2017

Thats a 250w-300w build .
A 400w+ PSU is more than enough.

As I said if the corsair cxm450 is available its a very efficient unit.
You dont waste electricity as such with a bigger PSU , they only draw from the mains what's required.

What country are you in ??

Bardebay · Jun 28, 2017

madmatt30 :

India,but going to Taiwan within a month or two.so I am trying to get the build now .

Search

Is this build good for 4K video editing?

Bardebay

Honorable

Ralston18

Ralston18

Titan

Bardebay

Honorable

madmatt30

Titan

Bardebay

Honorable

madmatt30

Titan

Bardebay

Honorable

madmatt30

Titan

Bardebay

Honorable

TRENDING THREADS

Latest posts

Moderators online

Share this page