- Jun 29, 2017
- 2
- 0
- 510
So I've just picked up a EVGA Geforce GTX 1060 card and when I come to install it on my Gigabyte GA-H61M-S2PV (Rev 2.1) motherboard I'm just getting a black screen.
I'm on Windows 10 64-Bit. I've got a I5 3300 3GHz 8GB of ram
I have a 500W power supply. Fan's turning on the card when I've got it plugged in.
I've tried upgrading the BIOS to the FId version (2014/02/27) which is apparently the most up to date version for the motherboard.
I've pre-installed the correct drivers for the card.
Now if I leave it for a while it has come up once using the basic windows graphics settings, but when I looked in the device manager there was no Display Adapter shown.
So is there anything else I should be looking at trying here?
Thanks
I'm on Windows 10 64-Bit. I've got a I5 3300 3GHz 8GB of ram
I have a 500W power supply. Fan's turning on the card when I've got it plugged in.
I've tried upgrading the BIOS to the FId version (2014/02/27) which is apparently the most up to date version for the motherboard.
I've pre-installed the correct drivers for the card.
Now if I leave it for a while it has come up once using the basic windows graphics settings, but when I looked in the device manager there was no Display Adapter shown.
So is there anything else I should be looking at trying here?
Thanks
.
Facebook
Twitter
Instagram