trident z g skill ram help

Toggle sidebar Toggle sidebar
M

Mike7977

Commendable
Dec 11, 2016
5
0
1,510
when i enable the preinstalled XMP the pc doesnt boot its just beeps 3 times then shuts down, im trying to get the 3000mhz rated speed out of these things instead of it running at 2133 forever. My system is AB350 gaming 3 motherboard, AMD ryzen 1600 @ 3.8ghz, GTX 1070 founders edition and the G Skill Trident Z RGB ram rated at 3000mhz
 
Sort by date Sort by votes
J

jonnilaumann

Prominent
Aug 18, 2017
18
0
520
There are problems on most 3000mhz ram on Ryzen systems, first: ram timings need to be higher. Try like 18-18-18-46-60. 3.8 Ghz is good, but 3.7 is better, bcs you can lower CPU volt under Stock, and both ram timings and Hz will oc higher=less watt/noise/temp vs the extra 2.5%cpu speed/ 2-4 extra fps in games and dont forget the very high ramtimings..no way, in the end you will gain nothing. I always do OC where Ram Timing and Watt is my main concern. I have TridenzZ 3200, but ryzen/trident sweetspot on stock Volt is 2966hz.(even 3066 on these 3200=very high Ram timings).... My 24/ OC=3.7ghz-1.244V....2966Hz, 1.35V,14-14-14-30-52..CineB=1250, (14-13-13-30-52 was slower-wierd?)....also remove any RGB software, until there is new BIOS update
 
Upvote 0 Downvote
Vellinious

Vellinious

Honorable
Dec 3, 2013
984
2
11,360
I run 32GB of TridentZ on a Ryzen rig at 3200 14 14 14 34 @ 1.35v after the latest bios update with no issues whatsoever. The only time I need to bump RAM voltage / SOC voltage is when I overclock the CPU past 3.9.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom