Need help with my first build !

jobine23 · Jul 1, 2017

Hi everyone, I just just finished my first build. But there's a problem, everything is powering up ( Graphics card, cpu fans, led, etc ) But nothing shows up to my monitor. Pics:

Not opened:

Opened

I tried:
-Testing ram slots, and using only one stick.
-I tried the hdmi port on my Graphics card & on my motherboard.

okcnaline · Jul 1, 2017

Is the 4-pin CPU cable plugged in?

What motherboard is it?

atomicWAR · Jul 1, 2017

Try reseating all wires (motherboard 24 pin, 8pin, GPU, SATA...all of them), reseating RAM and GPU. See if that helps. If you still can't get it to power up properly. This part sux for the record. Do a bare bone build. IE pull all your parts out of your case and build them on a hard non-conductive surface like a wood table even cardboard will work in a pinch. If you still have your anti-stactic bag lay you motherboard on it when doing this. By doing a bare bones build you will rule out any shorts from your motherboard. They can happen easily when you screw it into your case. It is a very common issue so don't feel bad if this is the case.

jobine23 · Jul 1, 2017

okcnaline :

I think yes

My motherboard: Msi Gaming Z170A M5

jobine23 · Jul 1, 2017

atomicWAR :

Try reseating all wires (motherboard 24 pin, 8pin, GPU, SATA...all of them), reseating RAM and GPU. See if that helps. If you still can't get it to power up properly. This part sux for the record. Do a bare bone build. IE pull all your parts out of your case and build them on a hard non-conductive surface like a wood table even cardboard will work in a pinch. If you still have your anti-stactic bag lay you motherboard on it when doing this. By doing a bare bones build you will rule out any shorts from your motherboard. They can happen easily when you screw it into your case. It is a very common issue so don't feel bad if this is the case.

Alright, I'll check it out ! Thank you

ARICH5 · Jul 1, 2017

what cpu is it? thats in your z170?

jobine23 · Jul 1, 2017

ARICH5 :

My cpu: I5 6600k

jobine23 · Jul 1, 2017

Hi, I just ''played'' with my 4-pin CPU cable, I think it was'nt connected properly ! Thank you everyone !

Search

Need help with my first build !

jobine23

Reputable

okcnaline

okcnaline

Splendid

atomicWAR

Glorious

jobine23

Reputable

jobine23

Reputable

ARICH5

Distinguished

jobine23

Reputable

jobine23

Reputable

TRENDING THREADS

Latest posts

Moderators online

Share this page