Solved

No signal with i7 7700K integrated gpu

Hey guys,

CPU:
Intel i7 7700K

Motherboard:
Asus Prime Z270-P

RAM:
Vengeance LPX DDR4 2x8 GB, 3000 Mhz

Case:
Sharkoon VS4-S ATX

HDD:
Western Digital 1 TB WD10EZWX BLUE SA3

PSU:
be quiet! Pure Power 10 600 watt, 80 plus silver ATX24

CPU cooler:
Pure Rock 150 watt TDP

Case fan:
Sharkoon Silent Eagle Modular fan

DVD-drive:
Asus DRW-24D5MT

When I turn the PC on, the motherboard keeps beeping with 1 long and 2 short beeps. I looked it up and it means that there is a video card error. The fans spin and the power light, DVD-drive light and mobo light light up.

There's no GPU, since this will arrive on wednesday.

But my CPU has integrated graphics (630) and this means it should work.

I connected the ATX24 pin and 12V 4pin for the CPU, the CPU fan , the Power SW, reset SW, HDD LED, LED+, LED-, POWER LED, Speaker, HD Audio, USB for case, SATA cables to the HDD and DVD drive, fans in MoBo.

My G910 Orion Spectrum keyboard, doesn't light up when connected to any, USB 2.0 or 3.0 in the front or back of the case.

HDMI connected to a TV and doesn't display. Read on forums that HDMI drivers might not be installed, but since the mobo is beeping I don't think that matters.

Oh and btw, this is my first build.
2 answers Last reply Best Answer
More about signal 7700k integrated gpu
  1. Unplug the Power supply and remove the battery and wait 5 mins.

    Put the battery back in and plug the PSU back in and turn the PC on.

    Should go straight into the bois.
  2. Best answer
    I fixed it already, but thanks.

    Turned out three pins were bent on the CPU socket on the motherboard, so I had to let it repair. It was send like this.

    It works like it should now.
Ask a new question

Read More

GPUs New Build CPUs Motherboards Hardware Problem