Hey guys, so I Have a problem. I recently bought some parts to upgrade my pc, the parts that I upgraded were the ram, CPU, and mobo. The Items being
RAM-Kingston RAM 8GB 2133MHz DDR4 CL15 DIMM
CPU-Intel Pentium G4400 3.3Ghz
MOBO-Asus Micro ATX DDR4 LGA 1151 Motherboard H110M-C/CSM
So I put together the PC with the new parts, new ram, mobo, cpu, and the rest of the items were the same. Hardrive, psu, cpu cooler,etc. I only changed 3 things, I swapped the old ram, cpu, mobo to the new ones. After I assembled the computer, I turned it on and everything turned on for 2 seconds then turned off, that happened in sort of like a boot loop until I disconnected the PSU.The occurrence happened in sort of like a loop. I would click the power button, it would turn on for 2 seconds then turn off. It looked like the whole thing was working but i got no post to the monitor. At first, I thought that I had assembled it wrong, so I unplugged everything and started from scratch. Soon after I assembled it for the second time, I tried turning it on and the same thing happened. It turned on, then off, and did that till the power supply was plugged in. then I started to worry that I had bought a Faulty pc part.
After looking up how to test the PSU, I tested it by doing the paper clip trick and it worked fine.
Test 1: I hooked up the 4pin, 20+4 pin to the New mobo, also hooked up the new ram and cpu. Connected the power switch 2pin to the mobo, hooked up the psu to the wall and clicked the power button. Hooked up the dvi to the monitor. And the same thing happened, turned off then on and looped till I disconnected the psu.
Test 2: did the same thing but switched the ram slots and same thing.
Test 3: Did everything the same except take out the one stick of ram, (So no ram in the system) and the loop happens.
(did all testing with stock heatsink)
After all testing, I reconnected my PC specs that I had BEFORE the upgrade and everything worked perfect.
This made me believe that i had a faulty part. Or the PSU is not compatible with the mobo or something.
What I am asking for here is to help me determine What is wrong with my PC, the PSU, or some other part that I bought.
I could also use some tips with testing the mobo, cpu, and ram. I can only use what I have listed because my parents will not allow me to buy another part until I know what is wrong with it and i am 100% sure that that part is bad.
Please help, and thank you for your time.
(computer before upgrade)
CPU- AMD A8-7600 3.1GHz Quad-Core Processor
CPU Cooler-Cooler Master - Hyper T2 54.8 CFM Sleeve Bearing CPU Cooler
Motherboard-Gigabyte - GA-F2A68HM-DS2H Micro ATX FM2+ Motherboard
Memory-Corsair - Vengeance 8GB (2 x 4GB) DDR3-1600 Memory
Storage-Seagate - Barracuda 250GB 3.5" 7200RPM Internal Hard Drive
Video Card-MSI - GeForce GTX 1050 2GB GAMING X 2G Video Card
Case-Corsair - SPEC-01 RED ATX Mid Tower Case
Power Supply- Logisys - 480W ATX Power Supply
(Supposed PC after the upgrade but some part is wrong)
RAM-Kingston RAM 8GB 2133MHz DDR4 CL15 DIMM
CPU-Intel Pentium G4400 3.3Ghz
MOBO-Asus Micro ATX DDR4 LGA 1151 Motherboard H110M-C/CSM
Storage-Seagate - Barracuda 250GB 3.5" 7200RPM Internal Hard Drive
Video Card-MSI - GeForce GTX 1050 2GB GAMING X 2G Video Card
Case-Corsair - SPEC-01 RED ATX Mid Tower Case
Power Supply- Logisys - 480W ATX Power Supply
CPU Cooler-Cooler Master - Hyper T2 54.8 CFM Sleeve Bearing CPU Cooler
RAM-Kingston RAM 8GB 2133MHz DDR4 CL15 DIMM
CPU-Intel Pentium G4400 3.3Ghz
MOBO-Asus Micro ATX DDR4 LGA 1151 Motherboard H110M-C/CSM
So I put together the PC with the new parts, new ram, mobo, cpu, and the rest of the items were the same. Hardrive, psu, cpu cooler,etc. I only changed 3 things, I swapped the old ram, cpu, mobo to the new ones. After I assembled the computer, I turned it on and everything turned on for 2 seconds then turned off, that happened in sort of like a boot loop until I disconnected the PSU.The occurrence happened in sort of like a loop. I would click the power button, it would turn on for 2 seconds then turn off. It looked like the whole thing was working but i got no post to the monitor. At first, I thought that I had assembled it wrong, so I unplugged everything and started from scratch. Soon after I assembled it for the second time, I tried turning it on and the same thing happened. It turned on, then off, and did that till the power supply was plugged in. then I started to worry that I had bought a Faulty pc part.
After looking up how to test the PSU, I tested it by doing the paper clip trick and it worked fine.
Test 1: I hooked up the 4pin, 20+4 pin to the New mobo, also hooked up the new ram and cpu. Connected the power switch 2pin to the mobo, hooked up the psu to the wall and clicked the power button. Hooked up the dvi to the monitor. And the same thing happened, turned off then on and looped till I disconnected the psu.
Test 2: did the same thing but switched the ram slots and same thing.
Test 3: Did everything the same except take out the one stick of ram, (So no ram in the system) and the loop happens.
(did all testing with stock heatsink)
After all testing, I reconnected my PC specs that I had BEFORE the upgrade and everything worked perfect.
This made me believe that i had a faulty part. Or the PSU is not compatible with the mobo or something.
What I am asking for here is to help me determine What is wrong with my PC, the PSU, or some other part that I bought.
I could also use some tips with testing the mobo, cpu, and ram. I can only use what I have listed because my parents will not allow me to buy another part until I know what is wrong with it and i am 100% sure that that part is bad.
Please help, and thank you for your time.
(computer before upgrade)
CPU- AMD A8-7600 3.1GHz Quad-Core Processor
CPU Cooler-Cooler Master - Hyper T2 54.8 CFM Sleeve Bearing CPU Cooler
Motherboard-Gigabyte - GA-F2A68HM-DS2H Micro ATX FM2+ Motherboard
Memory-Corsair - Vengeance 8GB (2 x 4GB) DDR3-1600 Memory
Storage-Seagate - Barracuda 250GB 3.5" 7200RPM Internal Hard Drive
Video Card-MSI - GeForce GTX 1050 2GB GAMING X 2G Video Card
Case-Corsair - SPEC-01 RED ATX Mid Tower Case
Power Supply- Logisys - 480W ATX Power Supply
(Supposed PC after the upgrade but some part is wrong)
RAM-Kingston RAM 8GB 2133MHz DDR4 CL15 DIMM
CPU-Intel Pentium G4400 3.3Ghz
MOBO-Asus Micro ATX DDR4 LGA 1151 Motherboard H110M-C/CSM
Storage-Seagate - Barracuda 250GB 3.5" 7200RPM Internal Hard Drive
Video Card-MSI - GeForce GTX 1050 2GB GAMING X 2G Video Card
Case-Corsair - SPEC-01 RED ATX Mid Tower Case
Power Supply- Logisys - 480W ATX Power Supply
CPU Cooler-Cooler Master - Hyper T2 54.8 CFM Sleeve Bearing CPU Cooler
Facebook
Twitter
Instagram