PC keep shutdown/turn on after inserting RAM
- Thread starter Drake_4
- Start date
Solution
hang-the-9
Titan
- Mar 25, 2010
- 60,387
- 1,081
- 152,940
If no RAM slots work with known good RAM, motherboard is bad. Did you try the system with more than one RAM stick? You can also try resetting the BIOS with the jumper. Chances are it's a bad motherboard.
Okay..I however I succesfully entering bios..after I reset cmos jumper.
Then after I set to default..or any settings...problems persist.
I assume this is bios failure because I can enter BIOS for long.
RAM changing is nothing to do with this....
Does Bios Failure is depend on PSU...because I'm going to replace that.
Then after I set to default..or any settings...problems persist.
I assume this is bios failure because I can enter BIOS for long.
RAM changing is nothing to do with this....
Does Bios Failure is depend on PSU...because I'm going to replace that.
Androguff
Prominent
- Mar 1, 2017
- 22
- 0
- 540
Try these out if it works.
http://www.tomshardware.co.uk/answers/id-2527235/computer-repeatedly-turns-back-installing-ram.html
http://www.tomshardware.co.uk/answers/id-2555523/installing-ram-computer-turn-repeatedly.html
http://www.techrepublic.com/forums/discussions/computer-turns-on-then-off-and-then-on-again-after-ram-upgrade/
http://www.tomshardware.co.uk/answers/id-2569930/turns-repeatedly-adding-ram.html
http://www.tomshardware.co.uk/answers/id-2527235/computer-repeatedly-turns-back-installing-ram.html
http://www.tomshardware.co.uk/answers/id-2555523/installing-ram-computer-turn-repeatedly.html
http://www.techrepublic.com/forums/discussions/computer-turns-on-then-off-and-then-on-again-after-ram-upgrade/
http://www.tomshardware.co.uk/answers/id-2569930/turns-repeatedly-adding-ram.html
well...its bios settings goes wrong.
its still something to do with ram actually...but not broken hardware.
so I have Installed different type of ram
1 Gb pc 1333 and 4 Gb pc 12800
so in bios settings I change Dram type from 1333 to 1600 is working now
and My pc get 5 gb of ram and no more shutdown after save/exit the bios
so thanks for the link.
its still something to do with ram actually...but not broken hardware.
so I have Installed different type of ram
1 Gb pc 1333 and 4 Gb pc 12800
so in bios settings I change Dram type from 1333 to 1600 is working now
and My pc get 5 gb of ram and no more shutdown after save/exit the bios
so thanks for the link.
TRENDING THREADS
-
-
News Windows 11 will reportedly display a watermark if your PC does not support AI requirements- Started by Admin
- Replies: 6
-
Question r9 390 a good budget option since rx 580s are overpriced?- Started by jordanbuilds1
- Replies: 3
-
-
Question a boot loop for IBM x3550 m4 but it immediately turns off
- Started by abdus1
- Replies: 2
Facebook
Twitter
Instagram