Front panel display help
- Thread starter Stefan_67
- Start date
Solution
alexoiu
Titan
- Nov 1, 2012
- 39,818
- 249
- 126,990
Hi,
If knowing the pinout of the 14 pin connector on the case, you can use cables like https://www.quietpc.com/na-front-panel-ss
However, you'd not be able to connect all pins on the new board. But at least the power and reset buttons. And maybe LEDs, if present on the old case.
If knowing the pinout of the 14 pin connector on the case, you can use cables like https://www.quietpc.com/na-front-panel-ss
However, you'd not be able to connect all pins on the new board. But at least the power and reset buttons. And maybe LEDs, if present on the old case.
alexoiu
Titan
- Nov 1, 2012
- 39,818
- 249
- 126,990
It this http://support.harlander.com/uploads/treiberdatenbank/gehaeuse_und_boards/d1837/d1837_technisches_handbuch.pdf
Then you can find the pinout inside.
Then you can find the pinout inside.
Facebook
Twitter
Instagram