Does this CPU cooler fit in this case?
- Thread starter farjadc
- Start date
Solution
As far as the cooler height and the case clearance is concerned, yes, it does (but you have to adjust the fan mounting position).
From Corsair website (http://www.corsair.com/en-us/carbide-series-200r-compact-atx-case): "Maximum CPU Cooler Height: 165mm"
From Cryorig website (http://www.cryorig.com/h5-ultimate_us.php): Dimension (with fan): L110.9 x W143 x H160 ~ 168.3mm (Fan position adjustable)
Problem is, when you lower the fan height, the RAM clearance below it would also decrease. Chances are, you might only be able to install 2 RAM sticks (at the 2nd slot and the 4th slot), as the fan would...
From Corsair website (http://www.corsair.com/en-us/carbide-series-200r-compact-atx-case): "Maximum CPU Cooler Height: 165mm"
From Cryorig website (http://www.cryorig.com/h5-ultimate_us.php): Dimension (with fan): L110.9 x W143 x H160 ~ 168.3mm (Fan position adjustable)
Problem is, when you lower the fan height, the RAM clearance below it would also decrease. Chances are, you might only be able to install 2 RAM sticks (at the 2nd slot and the 4th slot), as the fan would...
- Feb 22, 2015
- 4,102
- 90
- 39,040
As far as the cooler height and the case clearance is concerned, yes, it does (but you have to adjust the fan mounting position).
From Corsair website (http://www.corsair.com/en-us/carbide-series-200r-compact-atx-case): "Maximum CPU Cooler Height: 165mm"
From Cryorig website (http://www.cryorig.com/h5-ultimate_us.php): Dimension (with fan): L110.9 x W143 x H160 ~ 168.3mm (Fan position adjustable)
Problem is, when you lower the fan height, the RAM clearance below it would also decrease. Chances are, you might only be able to install 2 RAM sticks (at the 2nd slot and the 4th slot), as the fan would highly likely obstruct the RAM at the 1st slot - unless you can get low-profile RAMs below 30mm in height (those without heat spreaders).
From Corsair website (http://www.corsair.com/en-us/carbide-series-200r-compact-atx-case): "Maximum CPU Cooler Height: 165mm"
From Cryorig website (http://www.cryorig.com/h5-ultimate_us.php): Dimension (with fan): L110.9 x W143 x H160 ~ 168.3mm (Fan position adjustable)
Problem is, when you lower the fan height, the RAM clearance below it would also decrease. Chances are, you might only be able to install 2 RAM sticks (at the 2nd slot and the 4th slot), as the fan would highly likely obstruct the RAM at the 1st slot - unless you can get low-profile RAMs below 30mm in height (those without heat spreaders).
)TRENDING THREADS
-
-
-
Question Help in troubleshooting possible graphics card issue?
- Started by nort99
- Replies: 5
-
Question RX 6600 visual glitches right after upgrading to it- Started by Wamek
- Replies: 4
-
News US sanctions transform China into legacy chip production juggernaut — production jumped 40% in Q1 2024- Started by Admin
- Replies: 35
-
Facebook
Twitter
Instagram