Optiplex 390 And Multi GPU
- Thread starter RayKsu
- Start date
bicycle_repair_man
Splendid
- Jan 10, 2014
- 5,752
- 2
- 28,960
There's no way a budget business desktop will support multiple GPUs. If the motherboard doesn't stop you, the PSU certainly will, assuming you've not changed them.
To add to everything faalin said:
I am assuming you are trying to make a cheap mining computer (to make TENS of dollars mining).
If this is for gaming then that old little pentium wont even handle a single 460, let alone a 480, let alone 2 480s.
I am assuming you are trying to make a cheap mining computer (to make TENS of dollars mining).
If this is for gaming then that old little pentium wont even handle a single 460, let alone a 480, let alone 2 480s.
Was your old core 2 duo a completely different computer with a different motherboard?
Your 480 is an EFI only card and so your Optiplex 390, if even available, will likely require a bios update to support current gen cards.
Good look getting a fraction of your investment back.
Your 480 is an EFI only card and so your Optiplex 390, if even available, will likely require a bios update to support current gen cards.
Good look getting a fraction of your investment back.
AMD GPUs after R9-285/380, basically R3xx and up won't display the Dell BIOS resolution. No known Cure. 7xxx series cards work, and their R9, and R7 clones. In the E520 in my sig. I have to hit F1 to get past the issue with the R9-285. But I'm still locked out of my Locked BIOS. I don't knmow how much room there is in a Opti390 but I would look for Nvidia and an ITX if space is an issue.
bicycle_repair_man
Splendid
- Jan 10, 2014
- 5,752
- 2
- 28,960
If you replace the motherboard then you'll also need to buy another copy of Windows.
Do yourself a favour and stop. You're pouring money into a crap pre-built computer and the chances of you earning anything from mining, even enough to cover your current expenditure, is almost certainly zero.
Do yourself a favour and stop. You're pouring money into a crap pre-built computer and the chances of you earning anything from mining, even enough to cover your current expenditure, is almost certainly zero.
I disagree. A big PSU, aor GPU can be moved to a newer build later.
But dual GPU work stations are cheap and can come with an OS. Dell T3400, T3500. Be sure and get one with a 525W or higher PSU. The 375W supports one 6 pin GPU. for 2x 8pin GPUs an aftermarket PSU will be needed.
But dual GPU work stations are cheap and can come with an OS. Dell T3400, T3500. Be sure and get one with a 525W or higher PSU. The 375W supports one 6 pin GPU. for 2x 8pin GPUs an aftermarket PSU will be needed.
hendrayana
Prominent
- Jan 16, 2018
- 1
- 0
- 510
what optiplex 390 do you have? mini tower or DT?
what BIOS do you use, any special setting? , win 7 or win 10?
with external PSU and win 10 i only can make optiplex 390 recoqnize 1 gtx 1070, if i try to plug 1 more card, ( i tried your suggestion, no card on big pcie) the system won't boot
Dell M5DCD OptiPlex 390 LGA 1155/Socket H2 DDR3 SDRAM Motherboard make sure you run display from main port of board and click f1 even if screen is black thean after cuple minutes try change port display to gpu ones if no signal im using last bios for it no special setting
Hello,
I have dell optiplex 390 miniDT, running bios A11 (last on DELL page) and I'm unable to make more than one GPU working... I have option multiple GPUs checked in BIOS, I tried all possible combinations even one described here (to use port 2,3,4). Non is working. I'm using W10pro.
When I put all 3 cards in those slots and use onboard card for monitor (HDMI) nothing works, even I try to press F1, PC wont start / it just runs with black screen and never reaches windows (I have teamviewer on it, but it never gets online)
Could you share what special settings are you using?
I have dell optiplex 390 miniDT, running bios A11 (last on DELL page) and I'm unable to make more than one GPU working... I have option multiple GPUs checked in BIOS, I tried all possible combinations even one described here (to use port 2,3,4). Non is working. I'm using W10pro.
When I put all 3 cards in those slots and use onboard card for monitor (HDMI) nothing works, even I try to press F1, PC wont start / it just runs with black screen and never reaches windows (I have teamviewer on it, but it never gets online)
Could you share what special settings are you using?
The older Dell BIOS is incompatible with AMD GCN3 and up GPUs. They can't display the Dell VESA mode 103 BIOS screen. Sometimes you get error 43, sometimes they just won't boot. This applies to R9-3xx (+285) cards and newer. R9-2xx, R7, and HD series should work. I know this is an old thread, but it's unsolved, and is a common issue.
TRENDING THREADS
-
-
Question Tried moving SSD from old PC to new one, now it won't boot from either
- Started by scyer327
- Replies: 8
-
Question why my pc dont have sound after install new Nvidia GPU Card?
- Started by sudsaviour
- Replies: 3
-
News Windows 11 will reportedly display a watermark if your PC does not support AI requirements- Started by Admin
- Replies: 10
-
Latest posts
-
-
Question why my pc dont have sound after install new Nvidia GPU Card?
- Latest: ohio_buckeye
-
-
-
-
Facebook
Twitter
Instagram