Hello everyone. First of all heres my spec.
CPU: AMD Ryzen 5 1400 @3.2 GHz
GPU: RX580 Nitro+ 8GB 256Bit
RAM: 8GB 2666mhz
OS: Windows 10 64 bit.
Yesterday everything was working, I was going to format and clean install but i wanted to check my RAM because i watched video saying that default options might be lower then my RAM's frequency. So i checked and it was set on 2400 mhz, i only changed it to 2666 mhz without changing voltage or anything, went into boot menu and select my USB stick for Windows install and restart.
After that PC wouldnt boot up, no error beeps, no power on keyboard or mouse, no signal on monitor. Everything in case was powered up, GPU, CPU, MoBo's leds etc. I tried reseting CMOS with shorting CLTRC pins, removing battery for 10 min but nothing happened. Also tried reseating RAM, GPU and checked all the cables. Also my keyboard and mouse are not powered up. No light on NumLock led etc.
The rig is new, i bought it few months ago and it was perfectly fine till i changed RAM freq. and boot device.
I feel like there is something wrong with MoBo, even after CMOS reset it still wont boot. Did i brick my MOBO just by changing RAM frequency and trying to boot from USB stick?
Thanks in advance.
CPU: AMD Ryzen 5 1400 @3.2 GHz
GPU: RX580 Nitro+ 8GB 256Bit
RAM: 8GB 2666mhz
OS: Windows 10 64 bit.
Yesterday everything was working, I was going to format and clean install but i wanted to check my RAM because i watched video saying that default options might be lower then my RAM's frequency. So i checked and it was set on 2400 mhz, i only changed it to 2666 mhz without changing voltage or anything, went into boot menu and select my USB stick for Windows install and restart.
After that PC wouldnt boot up, no error beeps, no power on keyboard or mouse, no signal on monitor. Everything in case was powered up, GPU, CPU, MoBo's leds etc. I tried reseting CMOS with shorting CLTRC pins, removing battery for 10 min but nothing happened. Also tried reseating RAM, GPU and checked all the cables. Also my keyboard and mouse are not powered up. No light on NumLock led etc.
The rig is new, i bought it few months ago and it was perfectly fine till i changed RAM freq. and boot device.
I feel like there is something wrong with MoBo, even after CMOS reset it still wont boot. Did i brick my MOBO just by changing RAM frequency and trying to boot from USB stick?
Thanks in advance.
Facebook
Twitter
Instagram