1 long beep 2 short beeps (monitor displays no signal)

joe thompson

Honorable
Jul 15, 2017
19
0
10,510
Hello, recently I decided to build my first gaming PC. After completing the build and attaching the built PC to my monitor, the monitor displayed "no signal" even though all lights and fans on the PC are working. I then decided to attach a speaker which came with the mother board onto my PC and when I started it up again the speaker continuously makes 1 long beep and 2 short beeps. I then removed the graphics card and tried to use the integrated graphics on the cpu but this had the same result with the gpu plugged in. If I could receive any help, that would be greatly appreciated. Thank you

The specs for my PC are:

power supply,
80 PLUS 500W ATX

mobo,
ASUSTeK Intel H110 【microATX】

GPU,
GEFORCE GTX 1050Ti

CPU,
Intel core i3-7100

RAM,
CORSAIR DDR4 (2 sticks of 4GB)

SSD,
Kingston SSD 120GB

HDD,
2TB WD Blue WD20EZRZ/AFP

Monitor,
acer K202HQLAbd
 
Solution
Tried with just one stick of ram? Try both slots.Might want to do a clear cmos before since you added a dedicated gpu and now try on the igp.

joe thompson

Honorable
Jul 15, 2017
19
0
10,510


Holy crap, thank you so much! I tried taking out both sticks of ram and inserted one and it worked fine. Thanks again and god bless.