The R7 260x not working after removal

ahmed1472

Commendable
Apr 3, 2016
5
0
1,510
Hi everybody
I have hp pro 3500
Bought msi ati r7 260x 2gb gddr5 oc
For about 1 year .. but this week i realized that the gpu temp is going high and some times the pc goes off due to overheating .. so i removed the gpu .. cleaned it via blower .. then installed it again in the motherboard
But no signal !
1 updated bios via the integrated grpahic .. not working
2 resetting cmos (removed battery for 30 minutes then install it again) .. not working
3 removed the gpu heat sink to see if the gpu is going hot or not .. just to know of the gpu is stil working or preforming .. i found it going hot ! Thats mean its preforming but no signal

Please any help ?
 
Solution
Test it in another system. If it does not work then, card is bad, either the times that it shut off caused damage to it, or removing damaged something which can be possible. Overheating can put stress on the board of the card and the connections, removing the card could easy have fully broken something.
Test it in another system. If it does not work then, card is bad, either the times that it shut off caused damage to it, or removing damaged something which can be possible. Overheating can put stress on the board of the card and the connections, removing the card could easy have fully broken something.
 
Solution