Full system stresstest (ryzen max temp)

Rx 470 8gb

Reputable
Jun 13, 2017
15
0
4,510
Overclocking CPU and GPU

Not sure what tempeture I should consider as max when stresstesting CPU (Ryzen 5 1400).

The last stresstest I ran was quite extreme and it hit 88C before I finally stopped it. I had prime95, cinabench, Heaven and Valley benchmark both running on highest setting, but with a low resolution. Did it to test out my fans, Everything was running 100% except for GPU fans but the temps woudn't stop raising slowly but surely.

Was the stresstest to extreme or do I need to buy a better exhaust fan for my case if I want my CPU below 85 at all times when gaming etc? (Using 2 shadowwings for intake and the fan that came with the case for exhaust)
During the stresstest all 8 threads were running 3.5ghz at 100% usage on default voltage. And my 1060 6gb were running around 100% usage on 8800mhz memory and 2038-2067 core clock. Voltage on GPU is not touched and stayed between 1.04v and 1.06v.

Long story short: Is that stresstest to extreme? Will I ever put this much load on my PC when gaming etc?
What ryzen 1400 temp is max for 24/7 usage?
At what temp should I stop a stress test to prevent my CPU from overheating.

UPDATE: Just went into BIOS and saw that voltage is set to auto. Does this mean that the motherboard will increase voltage on its own to make the system more stable?
I put everything back to default becuase I can't understand how it works, apparently voltage goes up to 1.505 when I put +0.000v in bios. Everyone keeps saying it's easy to overclock but it sure as hell isn't when the motherboard is changing stuff automaticly without letting me know.
 
The Ryzen doesn't throttle till 95c so try to keep it under 85c. Also keep the voltage at or below 1.35v. For the 1400 you could get a low cost M9a due to the 1400 comes with the smaller cooler.
PCPartPicker part list / Price breakdown by merchant

CPU Cooler: CRYORIG - M9a 48.4 CFM CPU Cooler ($19.99 @ Newegg Marketplace)
Total: $19.99
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2017-07-19 11:36 EDT-0400
 

Rx 470 8gb

Reputable
Jun 13, 2017
15
0
4,510


On CPUID it says VID 1.550v. I left the voltage controll on auto and i quess the motherboard itself increased it. Or am I looking at the wrong voltage.
 

Rx 470 8gb

Reputable
Jun 13, 2017
15
0
4,510


I can't set it manually in the bios but I can type +0.000v instead of auto. it still went up to 1.505 though when I check with cpuid, this is at 3.2ghz. I don't understand why they make it like this, I didn't even know the stock settings could allow the voltage to go that high without me turning it up myself.
 

Rx 470 8gb

Reputable
Jun 13, 2017
15
0
4,510


GIGABYTE GA-AB350-Gaming 3. Im using bios f6, didn't know f7 was out.
Thanks for the help btw