Hello, I have 4 Gskill 4Gb ram sticks, but only 8 gb are being used, i tried booting with a single stick to try all the ports, it boots correctly on ports DDR3_A1 and DDR3_A2 but when i try booting the single ram stick on ports DDR3_B1 and DDR3_B2 it wont boot and the debug codes on the board will show code 50 or 54, when i try to boot with slots DDR3_A2 and DDR3_B2 with ram sticks installed simultaneosly it does boot, and the BIOS detects both rams sticks (although it says single channel mode) but windows says 8BG(3.99 usable)
I already checked that the timing and frequency parameters are correct.
also removed the CPU to check for bent pins, and made sure the water cooling wasnt too tight
Do i have faulty ports? or am i doing something wrong.
Thanks for the help in advance
My motherboard is a Fatal1ty 990FX professional edition
i have 64 bit windows 10 pro
I already checked that the timing and frequency parameters are correct.
also removed the CPU to check for bent pins, and made sure the water cooling wasnt too tight
Do i have faulty ports? or am i doing something wrong.
Thanks for the help in advance
My motherboard is a Fatal1ty 990FX professional edition
i have 64 bit windows 10 pro
Facebook
Twitter
Instagram