Hello,
There's a 2009 MOBO (mother board) ASUS M4A78T-E and OCZ 2X2GB reaper series CPU AMD Phenom X3 710 (intend to upgrade for + 2X2Gb OCZ reaper)
The main point is to use the Ram OCZ at the maximum in 7 7 7 cas latency at 1.9 V and 1600 MHZ. For that I overclock CPU, change the mother-board pin for OC CPU, raise the CPU multi from 200 to 245. North-Bridge, CPU Voltage and serial bus stays in AUTO, ram voltage raised for 1.9V. Using the AMD overdrive the Ram voltage change (according to CPUz don´t), but the cas latency up to or 9 if I overclock to 1600 MHZ. To mantain the 7 7 7 I need to use 1066 MHZ (if I mantain CPU not overclock, ram latency goes to "10")
The OCZ was build to operate at 7 7 7 at 1600mhz at 1.9V, and that's the purpose . If there's someone interested in this little challenge, remain the quest
Thank you
There's a 2009 MOBO (mother board) ASUS M4A78T-E and OCZ 2X2GB reaper series CPU AMD Phenom X3 710 (intend to upgrade for + 2X2Gb OCZ reaper)
The main point is to use the Ram OCZ at the maximum in 7 7 7 cas latency at 1.9 V and 1600 MHZ. For that I overclock CPU, change the mother-board pin for OC CPU, raise the CPU multi from 200 to 245. North-Bridge, CPU Voltage and serial bus stays in AUTO, ram voltage raised for 1.9V. Using the AMD overdrive the Ram voltage change (according to CPUz don´t), but the cas latency up to or 9 if I overclock to 1600 MHZ. To mantain the 7 7 7 I need to use 1066 MHZ (if I mantain CPU not overclock, ram latency goes to "10")
The OCZ was build to operate at 7 7 7 at 1600mhz at 1.9V, and that's the purpose . If there's someone interested in this little challenge, remain the quest
Thank you
Facebook
Twitter
Instagram