I bought a cyberpower pc with the professional wiring, one of my fans stopped working and I bought the replacement. Now, I can't take out the bad fan because I have to disconnect something I don't really understand. My question is if I can cut the cable directly connected to the fan then tape it up and leave it there inside my pc while I take out the bad fan.
Cut fan cable.
- Thread starter SmokW
- Start date
CountMike
Titan
- Oct 31, 2015
- 33,776
- 3,151
- 147,990
And where are you going to plug new one in ? Fans are not soldered to anything, they have plugs at the end, the plug you can unplug and plug another one in it's place. You can also cut those wires from old fan and that should allow you to pull them out of cable bundle.
- Jan 1, 2013
- 24,574
- 650
- 91,240
You're describing a double molex extender
Take a photo , upload it to https://postimages.org & paste the link here.
Those cables will unplug , there's no reason at all to cut them
Take a photo , upload it to https://postimages.org & paste the link here.
Those cables will unplug , there's no reason at all to cut them
Thats the fan to remove (I need i need to clean the pc)
Thats how the cable goes in the back and ends in a three pin that is unplugged and a four big pin that is the white thing between the other cables.
The red and black cables foes in that white end of the fan and if a remove that the other cables get disconnected. I can't attach the black connectors.
Is it safe to cut or how I replace that fan. (the new fan only brings a 3 pin)
TRENDING THREADS
-
-
-
Question What is PCB form factor ATX for PCIe Graphics Card?
- Started by mmp09
- Replies: 5
-
News Windows 11 will reportedly display a watermark if your PC does not support AI requirements- Started by Admin
- Replies: 7
-
Latest posts
-
-
Question why my pc dont have sound after install new Nvidia GPU Card?
- Latest: beyondlogic
-
-
-
Facebook
Twitter
Instagram