So this is my first build and I'm a total noob. So i wanted to overclock but my mobo didnt have a manual vcore setting. It only had an offset which kinda made me confused so I followed a guide on youtube and I was told to put the offset at .2 but when I checked the vcore on cpu-z, it was at 1.45. Is that enough voltage to affect the longevity or to damage anything in the cpu.
Is 1.45 volts enough to damage my ryzen 5 1600?
- Thread starter Joepickle
- Start date
Solution
Joepickle :
Here's a pic of the bios as u can see there are only two settings which are auto and offset
Also I know I shouldn't run at 1.45 volts for everyday use but is it ok if it just happened one time. Do you think it could have damaged anything? I...
Vellinious
Honorable
- Dec 3, 2013
- 984
- 2
- 11,360
That's the max voltage that AMD suggests, but only with sufficient cooling.
I certainly wouldn't run 1.45v for a daily clock. I'd make sure it was at or below 1.4 for daily, and probably lower depending on cooling.
What motherboard do you have?
I certainly wouldn't run 1.45v for a daily clock. I'd make sure it was at or below 1.4 for daily, and probably lower depending on cooling.
What motherboard do you have?
Vellinious
Honorable
- Dec 3, 2013
- 984
- 2
- 11,360
With a stock cooler, and the B350 board, I certainly wouldn't run 1.45v through my CPU. The VRMs will certainly be heating up with that much voltage, and the stock cooler really isn't made to remove that much heat.
A screenshot of your bios screen for the voltage adjustment may be helpful. I've never seen a board without a manual voltage selection.....
A screenshot of your bios screen for the voltage adjustment may be helpful. I've never seen a board without a manual voltage selection.....
Here's a pic of the bios as u can see there are only two settings which are auto and offset
Also I know I shouldn't run at 1.45 volts for everyday use but is it ok if it just happened one time. Do you think it could have damaged anything? I didn't notice that it was at a high voltage after running Aida 64 about 4 times.
Vellinious
Honorable
- Dec 3, 2013
- 984
- 2
- 11,360
Joepickle :
Here's a pic of the bios as u can see there are only two settings which are auto and offset
Also I know I shouldn't run at 1.45 volts for everyday use but is it ok if it just happened one time. Do you think it could have damaged anything? I didn't notice that it was at a high voltage after running Aida 64 about 4 times.
Just one time? No, I highly doubt it. I just wouldn't use that kind of voltage for a daily clock. Here and there for benchmarks? Sure, ok.
Your picture didn't show up, btw.
Vellinious :
Joepickle :
Here's a pic of the bios as u can see there are only two settings which are auto and offset
Also I know I shouldn't run at 1.45 volts for everyday use but is it ok if it just happened one time. Do you think it could have damaged anything? I didn't notice that it was at a high voltage after running Aida 64 about 4 times.
Just one time? No, I highly doubt it. I just wouldn't use that kind of voltage for a daily clock. Here and there for benchmarks? Sure, ok.
Your picture didn't show up, btw.
Oh ok good to know, thank you so much! And if u want to see the image it should show up now in this link
https://ibb.co/bUPY9k
Vellinious
Honorable
- Dec 3, 2013
- 984
- 2
- 11,360
Joepickle :
Vellinious :
Joepickle :
Here's a pic of the bios as u can see there are only two settings which are auto and offset
Also I know I shouldn't run at 1.45 volts for everyday use but is it ok if it just happened one time. Do you think it could have damaged anything? I didn't notice that it was at a high voltage after running Aida 64 about 4 times.
Just one time? No, I highly doubt it. I just wouldn't use that kind of voltage for a daily clock. Here and there for benchmarks? Sure, ok.
Your picture didn't show up, btw.
Oh ok good to know, thank you so much! And if u want to see the image it should show up now in this link
https://ibb.co/bUPY9k
I would check to see if there's an updated bios. That might just be a restriction that the B350 motherboards have.....
TRENDING THREADS
-
-
-
-
RTX 4060 Ti vs RX 7700 XT faceoff: Which midrange graphics card is superior?- Started by Admin
- Replies: 16
-
News Nintendo obliterates 8,535 Yuzu repos — Nintendo's most effective DMCA takedown campaign in years
- Started by Admin
- Replies: 31
-
Facebook
Twitter
Instagram