ASUS 970 PRO GAMING/AURA memory config

Pineapple Express

Prominent
Aug 4, 2017
4
0
510
i have a ASUS 970 PRO GAMING/AURA sys i am building. The memory specs for this board are

4 x DIMM, Max. 32GB, DDR3 2133(O.C.)/1866/1600/1333/1066 MHz Non-ECC, Un-buffered Memory *
Dual Channel Memory Architecture
* Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists).
* Due to OS limitation, when installing total memory of 4GB capacity or more, Windows® 32-bit operation system may only recognize less than 3GB. Install a 64-bit Windows® OS when you want to install 4GB or more memory on the motherboard.
* Due to CPU spec., AMD 100 series CPUs support up to DDR3 1066MHz. With ASUS design, this motherboard can support up to DDR3 1333MHz.

The guy where i bought the motherboard gave me 2 dimms of 16 gig.If i am reading this right this board will take 8 gig per slot x 4 = 32.Is that correct.I have the bare min installed, power supply, cpu, and memory.Lights on mother board are lit, when i push the power button both case fans and cpu fan cycle like its going to boot and stops.

Thanks for any help in advance.Thanks
 

Pineapple Express

Prominent
Aug 4, 2017
4
0
510
thanks for the info alex i am testing the suggestions in your link.Will reply with a update. I have a Corsair RM 750 brand new out of the box.Seems corsair had cable issue on the 24 pin & 8 pin cables. Another power supply fixed the issue.
IF anyone has any info on the cable issues with the RM 750 pls share.Thanks again
 

Pineapple Express

Prominent
Aug 4, 2017
4
0
510
I have a Corsair RM 750 brand new out of the box.Seems corsair had cable issue on the 24 pin & 8 pin cables. Another power supply fixed the issue.
IF anyone has any info on the cable issues with the RM 750 pls share.Thanks again