Hey guys!
Recently built a new pc, here are the specs;
Mobo - Maximus iX Hero
CPU - 7700 i7 1151
GPU - GTX 1080 Strix Asus OC edition
Ram - x2 8g DDR4 Corsair Vengeance LPX 2400MHz
H100i v2 Liquid Cooler
CX 750M Corsair Power Supply
570x Corsair Crystal Case
So this is my real first high end gaming pc, I've built one cheap gaming desktop 5-6 years ago, but that's all.
Followed instructions and guides on plugging things in, so everything should be properly plugged in. I've gone through and pulled everything to make sure it's all teethed properly. The issue is that my display is not showing up after pressing the power on button. When attempting to boot up my pc all LEDs turn on, all 8 fans are running. ( 3 on GPU, 2 at radiator for the cooler and the 3 on the side of the case ) All parts installed have power because their LEDs are lighting up. The Q Code is throwing the code 53 which is " memory initialization error. Invalid memory type or incomparable memory speed " but when looking back at the MOBO specs and compatabilities it says the 2400MHz is compatible. I've tried booting up the pc with one stick, tried all 4 slots with both sticks in / each one alone as well.
I've done just about every troubleshooting instance besides dropping the flash bio into the comp. Please help!
Recently built a new pc, here are the specs;
Mobo - Maximus iX Hero
CPU - 7700 i7 1151
GPU - GTX 1080 Strix Asus OC edition
Ram - x2 8g DDR4 Corsair Vengeance LPX 2400MHz
H100i v2 Liquid Cooler
CX 750M Corsair Power Supply
570x Corsair Crystal Case
So this is my real first high end gaming pc, I've built one cheap gaming desktop 5-6 years ago, but that's all.
Followed instructions and guides on plugging things in, so everything should be properly plugged in. I've gone through and pulled everything to make sure it's all teethed properly. The issue is that my display is not showing up after pressing the power on button. When attempting to boot up my pc all LEDs turn on, all 8 fans are running. ( 3 on GPU, 2 at radiator for the cooler and the 3 on the side of the case ) All parts installed have power because their LEDs are lighting up. The Q Code is throwing the code 53 which is " memory initialization error. Invalid memory type or incomparable memory speed " but when looking back at the MOBO specs and compatabilities it says the 2400MHz is compatible. I've tried booting up the pc with one stick, tried all 4 slots with both sticks in / each one alone as well.
I've done just about every troubleshooting instance besides dropping the flash bio into the comp. Please help!