Possible CPU overheating?

Nerdy Nerd

Reputable
Mar 19, 2016
814
0
5,360
So I am upgrading my system and got a i7-7700k in the mail. Old cpu is a i5-6500. I tested to make sure the i7 works and it did booting up my system. Then I put in my old cpu so i could play games until thursday when my new case and h100i water cooling gets here. Now I have msi afterburner and have the setting turned on so I can see cpu temps while in game. Displays it in purple. I seen the temp rise to 95 degress in just 2 minutes. I shut the game down and I look at msi and it says 52 with no signs on the history that it ever reached 95 degrees. So I am thinking what the heck. So my friend says maybe its msi is lying. So I downloaded hwinfo and it says it reaches temp of 80 degrees but with 50 degrees as idle where msi says idle is 30 degrees. I know I put the right pea shape of thermal paste on. The cpu fan is spinning and is on auto. Then I try setting fan speed manually to 100% and same thing happens. What is going on? Thanks in advance. Btw the fan speed was at 1025 rpm in hwinfo but when i set fan speed in msi to 100%, the hwinfo still said 1025 rpm but yet i heard the fan speed up. I also tried restarting the system to no avail. Any help would be great.
 
Solution
Nerdy Nerd,

Your last hardware action was to reinstall your i5 6500, which uses Intel's E97379 (PCG-2015C) all aluminum 65 Watt stock cooler.

Since you've removed the cooler, reinstalled it on your 7700K for a quick boot test, then removed it and reinstalled it again on your 6500, it's likely there's a push-pin that's not fully seated completely through the motherboard, which is an all too common problem and a deceivingly easy mistake to make.

Please carefully re-check each corner of the cooler using a strong light to look for a push-pin that's only partially seated. I think you'll find the problem.

CT :sol:

CompuTronix

Intel Master
Moderator
Nerdy Nerd,

Your last hardware action was to reinstall your i5 6500, which uses Intel's E97379 (PCG-2015C) all aluminum 65 Watt stock cooler.

Since you've removed the cooler, reinstalled it on your 7700K for a quick boot test, then removed it and reinstalled it again on your 6500, it's likely there's a push-pin that's not fully seated completely through the motherboard, which is an all too common problem and a deceivingly easy mistake to make.

Please carefully re-check each corner of the cooler using a strong light to look for a push-pin that's only partially seated. I think you'll find the problem.

CT :sol:
 
Solution


Intel's stock coolers are literally s***. You should get a Noctua NH-D14/15/S, or an AIO cooler if you plan to overclock.
 

Nerdy Nerd

Reputable
Mar 19, 2016
814
0
5,360
Actually I went back in and it wasn't pushed down all the way. Now I am getting 59 degrees at 100% so a lot better but not like before. I will settle for this until thursday when I put in my new i7-7700k, z170 pro gaming motherboard, h100i gtx, case. Then other stuff is old just transferring.