- Feb 16, 2013
- 28
- 0
- 10,540
Hello. I was recently given a Pioneer 5.1 receiver as a gift (link to the web page below).
Before I was given this, I have been using my Kanto YU2 studio monitors w/ a subwoofer (using the YU2's sub out) as a daily driver for both games and music via USB. The left speaker is active and the right one is passive.
I was wondering if there is a way to use these two speakers as the left and right channels on the receiver without breaking them. Ideally I would like these to be the left and right speakers for a 5.1 system. I have spare passive center/rear left/rear right speakers that work properly with this receiver by the way.
Receiver: http://
>>>>>TL;DR<<<<<
How can I safely incorporate Kanto YU2 powered speakers into a 5.1 system with a Pioneer VSX-523 receiver?
Before I was given this, I have been using my Kanto YU2 studio monitors w/ a subwoofer (using the YU2's sub out) as a daily driver for both games and music via USB. The left speaker is active and the right one is passive.
I was wondering if there is a way to use these two speakers as the left and right channels on the receiver without breaking them. Ideally I would like these to be the left and right speakers for a 5.1 system. I have spare passive center/rear left/rear right speakers that work properly with this receiver by the way.
Receiver: http://
>>>>>TL;DR<<<<<
How can I safely incorporate Kanto YU2 powered speakers into a 5.1 system with a Pioneer VSX-523 receiver?
Facebook
Twitter
Instagram