having problems after installing a deepcool 240ex liquid cooler

Toggle sidebar Toggle sidebar
B

bluelab

Prominent
Aug 9, 2017
10
0
520
hello having a problem after installing a deepcool 240ex liquid cooler.

so i got it all installed and when to boot up my computer for the first time after installing it, it took 5 or 7 restart by it's self tries befor it will boot up windows 10.

when i power it on everything come on cpu pump light come on & rad fan come on then 1 or 2 sec after they shut off then it start back up again for about 5 to 7 time befor it will boot up normal?

anyone got any clue? comptuer wasnt doing this with the stock ryzen 5 1600 cooler
 
Solution
B


ok. well i found the problem!!!!:pt1cable:

so i re flashed the bios back too 250 Version to the stock 250 version,

i had the xmp ram profile set too 2800mhz when i had the old cooler on, cause with the new ryzen and mobo you can only get 2133 mhz without changing anything so i did the xmp way to set it too the 2800mhz manualy.

my ram stick are 2X 8g 3000mhz ram

so when this was at 2800mhz was the added cooler fans and pump taking to much power away from the ram on start up so it wouldnt aloud the computer to start up properly.

and i also re tested it back on the 2800 mhz profile it did the samething! so im now at stock set @ 2133 mhz and the computer start no problem no reboots it just start right up!
Sort by date Sort by votes
B

bluelab

Prominent
Aug 9, 2017
10
0
520


the pump is only a 3 pin connector i dont have any adapters

also using the asrock ab350m pro 4 motherboard
 
Upvote 0 Downvote
B

bluelab

Prominent
Aug 9, 2017
10
0
520


just tryed that still doing the same thing
 
Upvote 0 Downvote
B

bluelab

Prominent
Aug 9, 2017
10
0
520


just tryed this i re checked all the wires unpluged everything then plug it all back it everything looked good,

it still is doing the same thing :(
 
Upvote 0 Downvote
B

bluelab

Prominent
Aug 9, 2017
10
0
520


ok. well i found the problem!!!!:pt1cable:

so i re flashed the bios back too 250 Version to the stock 250 version,

i had the xmp ram profile set too 2800mhz when i had the old cooler on, cause with the new ryzen and mobo you can only get 2133 mhz without changing anything so i did the xmp way to set it too the 2800mhz manualy.

my ram stick are 2X 8g 3000mhz ram

so when this was at 2800mhz was the added cooler fans and pump taking to much power away from the ram on start up so it wouldnt aloud the computer to start up properly.

and i also re tested it back on the 2800 mhz profile it did the samething! so im now at stock set @ 2133 mhz and the computer start no problem no reboots it just start right up!
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom