- Jul 4, 2008
- 28
- 0
- 18,530
Hello all,
I own a GA-H61M-DS2 HDMI. The problem is that PEG is not detected for some reason. Fans spin, GPU gets warm but there is no display. Only when using IGFX, there is display on the monitor. In windows device manager the PCIEx16 gfx is not detected at all.
I have tried and changed:
PSU, RAM, CPU, Used 4 different graphics cards, 7600 gt, r7 250, gtx 980, hd 4870, ALL cards and in working order but none of them displays signal on the monitor.
When i change from BIOS initial display to PEG it goes back to auto. I have removed battery unplugged the PSU reset CMOS for 30 secs, also left it overnight without battery and all but same issue.
The board was used by a friend of mine and it was in perfect working order. I m out of ideas can anyone help?
Thanks for reading
I own a GA-H61M-DS2 HDMI. The problem is that PEG is not detected for some reason. Fans spin, GPU gets warm but there is no display. Only when using IGFX, there is display on the monitor. In windows device manager the PCIEx16 gfx is not detected at all.
I have tried and changed:
PSU, RAM, CPU, Used 4 different graphics cards, 7600 gt, r7 250, gtx 980, hd 4870, ALL cards and in working order but none of them displays signal on the monitor.
When i change from BIOS initial display to PEG it goes back to auto. I have removed battery unplugged the PSU reset CMOS for 30 secs, also left it overnight without battery and all but same issue.
The board was used by a friend of mine and it was in perfect working order. I m out of ideas can anyone help?
Thanks for reading
Facebook
Twitter
Instagram