Solved

Deepcool Maelstrom 240T connector question.

I have a question for you guys. I have an AIO cooler and i want to know if i plugged to connectors wrong or not. So i have that connector on the pump (pic1) connected to the AIO_Pump and the 2 fans on the radiator are connected by the "splitter" (pic 2) and plugged into CPU_Fan.

Should i keep the pump connector into AIO_Pump or switch it to CPU_Fan and switch the radiator fans connectors to CPU_Opt?

Also i have 3 more fans (2 top, 1 rear) and i was thinking to connect the top ones on the same "splitter" instead of CHA_Fan1 and CHA_Fan 2. What do you think?

My motherboard is a Z270E Gaming with an I7 7700 3.6 and a GTX 1080. All connectors are 3 pin.

Thank you so much for taking the time to answer my question.

PS: i don't know if "splitter" is the correct name for that thing. English is not my first language :P

Reply to tenniscapper23
1 answer Last reply Best Answer
More about deepcool maelstrom 240t connector question
  1. Best answer
    Pump goes to CPU_Fan header.

    2 fans on the radiator are connected by the "splitter" and plugged into Chassis/System Fan header

    Installation .pdf
    .http://www.deepcool.com/download/pdf/240T%20Installation%20Guide_En.pdf
    Reply to Calvin7
Ask a new question Answer

Read More

DeepCool Cooling CPUs