I'm trying to buy the new Fractal Design Meshify C case, and I was wondering if I would be able to fit the MSI X370 Titanium AM4 Motherboard, G.Skill Flare X 16gb ram, and the NZXT Kraken X62 cooler without a problem. Will it all fit?
The motherboard has an ATX form factor, which fits the case.
All DDR4 memory modules are compatible with the board, so yes.
The case fits up to 360mm radiators, so the Kraken x62 fits (280mm).
The motherboard has an ATX form factor, which fits the case.
All DDR4 memory modules are compatible with the board, so yes.
The case fits up to 360mm radiators, so the Kraken x62 fits (280mm).
The case specs say that the top of the case supports up to a 240mm rad, but it also allows up to 2 140mm fans, so the X62 will fit the top of the case? I don't wanna mount it to the front of the case
Only in the front. Why don't you wanna fit it in the front? It's the best placement for radiators since you get fresh air from outside the case to cool the radiator, and not hot air from inside the case to cool it.
Only in the front. Why don't you wanna fit it in the front? It's the best placement for radiators since you get fresh air from outside the case to cool the radiator, and not hot air from inside the case to cool it.
Only in the front. Why don't you wanna fit it in the front? It's the best placement for radiators since you get fresh air from outside the case to cool the radiator, and not hot air from inside the case to cool it.
Okay, so if I mount it to the front of the case, and I use a Galax GTX 1080 gpu, will there be any space issues regarding the cooler and the gpu?
The exact 1080 I'll be getting is this one, http://galaxstore.net/GALAX-GeForce-GTX-1080-Ti-EXOC-White_p_131.html
the fans I'll be using for the cooler are these, https://www.newegg.com/Product/Product.aspx?Item=N82E16835608047
and of course you already know that I'll be using the meshify c case. Now with this exact gpu and fans with the X62 cooler, are you sure there wont be any space issues regarding putting the cooler on the front of the case? I just want to be sure before I buy parts and then it ends up not fitting properly