Fans running at 100%; case is supposed to have fan control

ruki.deathvoice

Prominent
Aug 14, 2017
10
0
510
I bought a Kolink Luminosity RGB Tower which is supposed to have fan control. It was delivered without manual and I can't figure out how to quiet the fans.

In the back it has one fan with a big molex (male?) connector, which I wired directly to the PSU. In the front it has two LED fans (the remote doesn't work,unfortunately) with a lot of wires conected together and on the end again one big molex connector. These two are connected to the PSU as well.

I know these are probably crappy cheap fans, but the case was told to have a Fan Control (3-Pin, 2x 2-Connectors) and I would love to use this thing.
Can somebody help please?
https://www.caseking.de/en/kolink-luminosity-rgb-midi-tower-schwarz-window-gekl-029.html
 
Solution
the first picture, the plug at the VERY top (of the picture, based on the picture's orientation), should be the fan control. at least it's the only thing in your photo that makes sense.

mrjack2207

Reputable
Jul 29, 2015
406
1
4,860
Try and plug them into your psu

 
pretty straight forward, on the top of your case there is a fan button, check the bundle of wires coming off the top panel, there should be some sort of connector to plug your fans into, and a connector to plug into power (any fan you plug directly into the power supply will NOT be controllable in any way whatsoever, to control fans they either need to be connected to motherboard headers, or some sort of fan control, your case fan control is in the top, by the front). I suspect the remote's receiver also requires power, but if they know what they're doing, then it's bundled together with the fan control.

BTW: just a guess on all of this, mostly due to the photos that are availible of your case.
 

ruki.deathvoice

Prominent
Aug 14, 2017
10
0
510


I just took some pictures. I'm a noob, but it doesn't even look like the fan control is connected :( What do you think?
http://imgur.com/a/GWUYB