DVI to VGA adapter works on other PCs but not mine

Vermillion_1

Prominent
Aug 2, 2017
118
0
690
I bought a GTX 1050ti GPU from EVGA from Amazon. I installed to my PC and it is working fine. The HDMI is working fine with my main monitor. I got an active DisplayPort to HDMI adapter (https://www.amazon.ca/gp/product/B00EDT0072/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) to connect my second monitor(HDMI) to my PC(DisplayPort). I also got a DVI to VGA active adapter to connect my old monitor (VGA) to my PC (DVI). It did not work. So I went to my father's new computer and I used the adapter on that. I did not work. So I went the oldest PC in the house and I connected the old monitor directly with VGA to the PC. It worked. I got another old monitor that was working with direct VGA and I took it to my father's old computer and I connected it with the DVI to VGA adapter and it worked! So I took it my current PC, but it did not work! Please help!
 
Solution


This is one of the reasons for VGA dying out. If you are lucky the monitor has a web page somewhere which allows downloading drivers. Otherwise you can try various modes and if they work you are in luck. If the system starts in a mode not...
Older VGA cuts the wire used for the video card to query the monitor. Auto configuration is disabled whenever any VGA component is used. On the systems which worked you got lucky. On the systems which did not work you'll need to manually configure with a driver disk for the monitor.
 

Vermillion_1

Prominent
Aug 2, 2017
118
0
690


How do I do that?
 

Vermillion_1

Prominent
Aug 2, 2017
118
0
690


I have no problem with DP to HDMI. The problem is that I have a DVI to VGA active adapter that won't work on my PC, but it will for others.
 


Could be as LinuxDevice stated but no way anyone can tell you for sure without knowing all the monitors and graphics cards it was plugged into that worked and did not work.
 

Vermillion_1

Prominent
Aug 2, 2017
118
0
690


No no. I meant that I tried 2 different monitors on 2 different PCs. First monitor did not work with both PCs, second monitor worked with only one PC. Also, the first monitor works when I directly connect it with VGA on a very old PC.
 

Vermillion_1

Prominent
Aug 2, 2017
118
0
690


Sorry, I don't understand what you are trying to say :/

 


The following is from your original post:



Maybe you need the Micro USB Power Cable for that adapter because the two graphics cards you've tried it on do not supply enough power to the adapter through their DVI port.
 

Vermillion_1

Prominent
Aug 2, 2017
118
0
690


Okay, what about the second old monitor? I am using that one now because it worked with the other PC. How come it worked with the other PC but not mine?

 


Maybe because the old computer's DVI port is able to supply sufficient power to the DVI to VGA active adapter.
 

Vermillion_1

Prominent
Aug 2, 2017
118
0
690


Hmm... Is there a way where I can test if that is the case?
 


Get a Micro USB Power Cable and plug it into the adapter and a USB port.
 

Vermillion_1

Prominent
Aug 2, 2017
118
0
690


Can you please link me one from Amazon.ca? Also, I don't think the adapter has a Micro USB port.

 

Vermillion_1

Prominent
Aug 2, 2017
118
0
690


Can you please link me one from Amazon.ca? Also, I don't think the adapter has a Micro USB port.

 

Vermillion_1

Prominent
Aug 2, 2017
118
0
690


I am looking around the adapter and I do not see any Micro USB port.