please help !!

gtaboy17 · Aug 19, 2017

hey i builded my first pc with palit gtx 1050 TI 4gb and the pc boots everything is running but my keyboard mouse and monitor doesent i got VGA monitor and i plug it in my motherboard asus prime b250 pro so im wondering is the monitor not working because i need to plug in my graphics card or what i really need help

alexoiu · Aug 19, 2017

Hi, Yes, when using a card, the onboard is disabled, so connect the monitor to the card, but not digital to analog, if not using a converter.

gtaboy17 · Aug 19, 2017

so since i got vga monitor do i need to buy HDMI or DVI cable to connect it with vga

alexoiu · Aug 19, 2017

No, HDMI and DVI-D are digital, therefore you'd need an active converter.
Only if DVI-I available on the card, you can use a passive adapter.
Check the port on the card if DVI-I or DVI-D http://s.hswstatic.com/gif/dual-dvi.jpg

gtaboy17 · Aug 19, 2017

i checked it mine has DUAL link DVI-D one could you link the thing that i need to buy

alexoiu · Aug 19, 2017

Something like https://www.amazon.com/gofanco-Pro-DVI-D-Active-Converter/dp/B00RWFT8NG
Same for HDMI.

gtaboy17 · Aug 19, 2017

it seems like my monitor has DVI-D port aswell as VGA so does that mean i can just buy DVI-D cable and plug it in

alexoiu · Aug 19, 2017

Yes, if the card did not come with one (usually, it does).

gtaboy17 · Aug 19, 2017

nope my palit gtx 1050 ti didnt come with any cables just the card

alexoiu · Aug 19, 2017

Then a DVI-D cable should solve the issue.

gtaboy17 · Aug 19, 2017

but il order the adapter and then it should just work?

alexoiu · Aug 19, 2017

Why adapter? A cable is much cheaper: https://www.amazon.com/StarTech-com-DVI-D-Single-Link-Cable/dp/B000067SOL/ref=sr_1_6?s=electronics&ie=UTF8&qid=1503178180&sr=1-6&keywords=DVI-D+single+Link+Cable
Pick one, according to the needed cable length.

gtaboy17 · Aug 19, 2017

i got this monitor https://support.hp.com/hr-en/document/c02652493 so it should work the cable one ?

gtaboy17 · Aug 19, 2017

i really hope the computer will work then when i booted it everything worked but keyboard and mouse and monitor didnt the gtx 1050 is really strange i didnt know you had to plug monitor to the graphics card

gtaboy17 · Aug 19, 2017

and the graphics card has a HDMI port aswell do i need to use it? and some other port dont know what kinda port it is

alexoiu · Aug 19, 2017

If removing the graphics card and connecting the monitor to the motherboard via VGA are you getting any signal on monitor?

gtaboy17 · Aug 19, 2017

nope i tried it removed it and still didnt work

alexoiu · Aug 19, 2017

Then check http://www.tomshardware.co.uk/forum/261145-31-perform-steps-posting-post-boot-video-problems
See if helping.

gtaboy17 · Aug 19, 2017

so the problem isnt with the whole vga situation

alexoiu · Aug 19, 2017

Not only.

gtaboy17 · Aug 19, 2017

the only thing i havent done is the standoff screws

alexoiu · Aug 19, 2017

Try leaving single RAM module and testing each RAM slot. Graphics card removed.

gtaboy17 · Aug 19, 2017

i resetted the rams

alexoiu · Aug 19, 2017

please help !!

Prominent

Titan

Prominent

Titan

Prominent

Titan

Prominent

Titan

Prominent

Titan

Prominent

Titan

Prominent

Prominent

Prominent

Titan

Prominent

Titan

Prominent

Titan

Prominent

Titan

Prominent

Titan

Share this page