Ryzen 5 1600x safe cpu voltage

David119 · Aug 21, 2017

so what is the safe vcore voltage for this cpu? i read it is somewere between 1.35v and 1.45v. I am talking here for 24/7 daily use. I have my oced to 4ghz on 1.375v and i dont know if it is safe and will not damage the cpu in the long run. My stock voltage was 1.45v... after the bios update on the crosshair 6 hero the stock voltage was the same so i dont think that it would be safe to use on that much voltage ? or am i wrong? so i am asking here.
thank you in advance.

Superkoopatrooper · Aug 21, 2017

I would never go as far as 1.45v, that's just insane, this isn't bulldozer. I'd say 1.4v is the limit for what i'd recommend. It's also hardly necessary. Beyond around 3.85ghz, ryzen needs stupid amounts of voltage. I'd say 1.35-1.375 is the perfect voltage and you should be able to hit almost 3.875ghz. You'd probably need 1.4v or a little more to hit 3.9-4ghz. Be sure to monitor temps too.

David119 · Aug 21, 2017

Superkoopatrooper :

i hit the 4ghz on 1.375v http:// and it is stable. i have idle temps of 32-38c with x62 kraken. While gaming on BF1 with all ultra settings i have like 50-59c max i saw was 69 on aida64 for 2s and then the cooler cought up with the temp and went down to stable 61c all the time of the test.

scout_03 · Aug 21, 2017

lower back voltage to safe zone and set ram to the jedec settings the will give you more speed for them and after you will a increase in cpu speed without raising up any voltage on it or ram .

David119 · Aug 21, 2017

scout_03 :

plz explain couse i am new to this overclocking

scout_03 · Aug 21, 2017

ok in uefi under advance you will see overclock so set axmp on 1 or 2 and check if the ram read to is lowest jedec settings and aplly change do not touch any voltages on ram or cpu then use hwinfo to see ram speed x2 the readings .

Vellinious · Aug 21, 2017

AMD has stated that 1.45v is fine with sufficient cooling (custom loop). For a daily clock, I wouldn't go over 1.4v, regardless of cooling. I've run as high as 1.52v for benchmarking.

Your 4.0 @ 1.375v is just fine for a daily clock. I would suggest, though, setting LLC to lvl 3, and try lowering the voltage.

CPU Load Line Calibration and CPU Current Capability settings. Ignore the rest for now. I'll take some screeshots of my complete bios setup for my daily.....would be a good place to start. Until then....open up your owners manual, and familiarize yourself with the bios.

My also want to make sure that you've updated to the latest bios version. Should be 1403.

David119 · Aug 22, 2017

Vellinious :

thanks for the info. i tried using the 1403 version but then i get the x22 bug were the cpu is stuck on2.2ghz.... i am runing the 9920 version from asus

Vellinious · Aug 22, 2017

That's really weird....I wish they'd figure out what's causing that bug.

David119 · Aug 22, 2017

i did as you said with the llc and the cpu current capability and i am now down to 1.34375v on the cores. so not bad at all

thanks for the tips. now i am lower then the 1.35v mark and i am satisfied with this cpu. i came from the fx 8350 and man this chip is an improvement over the fx

now i am hyped for the zen 2.0. as for the bios. i even had the 1501 version and had other issues so flashbacked to 9920 and will be waiting for another version

muelo1000 · Jan 13, 2018

David119 :

Superkoopatrooper :

i hit the 4ghz on 1.375v http:// and it is stable. i have idle temps of 32-38c with x62 kraken. While gaming on BF1 with all ultra settings i have like 50-59c max i saw was 69 on aida64 for 2s and then the cooler cought up with the temp and went down to stable 61c all the time of the test.

Wow thats great I have to set it to 1.41 - 1.42v to have a stable 4Ghz OC. on my 1600 ...I will try to thechange the LLC

Renegade1 · Jan 25, 2018

muelo1000 :

David119 :

Wow thats great I have to set it to 1.41 - 1.42v to have a stable 4Ghz OC. on my 1600 ...I will try to thechange the LLC

Im, running my 1600X at 1.300v stable at 4Ghz. H110i cpu cooler. Golden chip..? just got it, and my new motherboard with ram 4 days ago.

Vellinious · Jan 26, 2018

Renegade1 :

muelo1000 :

Im, running my 1600X at 1.300v stable at 4Ghz. H110i cpu cooler. Golden chip..? just got it, and my new motherboard with ram 4 days ago.

Top 15%, but I wouldn't say golden. If it's stable at 4.2 @ 1.45v or lower, then you'd have a golden CPU.

Search

Ryzen 5 1600x safe cpu voltage

David119

Prominent

Vellinious

Superkoopatrooper

Honorable

David119

Prominent

scout_03

Titan

David119

Prominent

scout_03

Titan

Vellinious

Honorable

David119

Prominent

Vellinious

Honorable

David119

Prominent

muelo1000

Prominent

Renegade1

Reputable

Vellinious

Honorable

TRENDING THREADS

Latest posts

Moderators online

Share this page