EZ-Debug Light is on

Toggle sidebar Toggle sidebar
P

Pianodude04

Prominent
Jul 7, 2017
17
0
510
I just finished building my first computer, and I turned it on. It has an MSI H110M Pro-D motherboard installed. The EZ-Debug light for DRAM is on. I'm not sure why. The RAM sticks are installed and pushed in completely. I've tried switching them around with no luck. Any help would be greatly appreciated! Could it be the motherboard cpu combo? I am using a Intel Pentium G4500 CPU.
 
Solution
alexoiu
Theoretically, they should work. Have you tested with single RAM each slot?
If yes, and still no go, try clearing the CMOS.
If still the same, try testing different RAM model, if possible, or try RMA-ing both board and CPU.
Sort by date Sort by votes
P

Pianodude04

Prominent
Jul 7, 2017
17
0
510


I removed one of the RAM sticks and it worked perfectly! However, when I turn on the computer, I can't type anything to select F2 to load default values. Any idea why that is happening?
 
Upvote 0 Downvote
P

Pianodude04

Prominent
Jul 7, 2017
17
0
510


I just tried that and now the DRAM light is back on. Also, when I had unplugged the second one, the DRAM light went off but then the VGA light went on.
 
Upvote 0 Downvote
P

Pianodude04

Prominent
Jul 7, 2017
17
0
510

Here is a picture
(http://bit.ly/2vipmNl) if it doesn't show up
open
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom