is my pc damaged from a fall?

Toggle sidebar Toggle sidebar
R

roudy-s

Reputable
Jan 21, 2017
314
0
4,780
hello, i have a cooler master case and all the components are on it like the gtx 970 the cpu and the fan the rams and hard disk i was going to clean my pc from inside my pc is on the table i have a pc table. while i was pulling my case out i didn't paid attention that the table under the pc case is short so it slipped or falled i don't know the exact word but the meaning is that it has falled from the table to the floor and the height between the table and the floor is 11 cm maximum and it felled directly i mean vertically and landed on its legs ( the black pieces that are under the case) nothing happened and the psu where you put the cable this plastic place have come out i stick it in and that is it my question is will this make any damage to my pc components and thank you.
 
Solution
B
10cm = 4 inches so that is a very small drop.

If everything was bolted down good then odds are it is fine.

Only way to know is to try to boot it, you can open the case and make sure nothing looks out of place before booting it if you know what to look for.
95% chance it is completely fine.
Sort by date Sort by votes
B

boosted1g

Titan
Jun 12, 2013
14,846
8
74,965
10cm = 4 inches so that is a very small drop.

If everything was bolted down good then odds are it is fine.

Only way to know is to try to boot it, you can open the case and make sure nothing looks out of place before booting it if you know what to look for.
95% chance it is completely fine.
 
Upvote 0 Downvote
Solution
R

roudy-s

Reputable
Jan 21, 2017
314
0
4,780
i have booted it and everything is working fine nothing is out and the distance is 11 cm i have mesured it so i can say that nothing has happened or is damaged? and thaank you
 
Upvote 0 Downvote
R

roudy-s

Reputable
Jan 21, 2017
314
0
4,780
https://ibb.co/gn2cSQ
https://ibb.co/gXY6Mk

these are 2 picture of my cpu fan witch is a thermaltake i was wondering if because of the fall anything will be damaged or go out or it is impossible like this kind of heatsink to be released it is not a pin that you push it it is scrrewed to the motherboard you put the fan in the standing screw and you put the four pieces od metal on the screw and turn them tightly sorry for my bad english and thank you.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom