PC wont POST after driver update. CPU led red on MSI mobo.

Toggle sidebar Toggle sidebar
A

andrekon1068

Prominent
Aug 31, 2017
2
0
510
After the driver update utility Auslogic driver udate the computer does not start. Utility updated drivers Intel: the chipset and other drivers. On the motherboard the cpu ez debug led is on. I tried to reset CMOS, unplugged and replugged everything , replace PSU, update BIOS via USB flash, but all the time I see the same thing - black screen and red led CPU.

The system is
MSI H110M PRO VD PLUS
GIGABYTE G1 GAMING GTX 1050Ti
Intel i3 6100
8gb ddr4 RAM

p.s. sorry for my english
 
Solution
HamBown81
Make sure that your CPU power connector and 24-pin main power connector are fully seated. If that doesn't make a difference I would try reseating the CPU.

Strange that it would start all of a sudden, any other relevant info?

EDIT: I see you already did this, but the light indicates that either the CPU isn't getting power (or not enough) or some other issue with detection. Do you have another power supply that you could try?
Sort by date Sort by votes
HamBown81

HamBown81

Commendable
Aug 3, 2017
917
0
1,360
Make sure that your CPU power connector and 24-pin main power connector are fully seated. If that doesn't make a difference I would try reseating the CPU.

Strange that it would start all of a sudden, any other relevant info?

EDIT: I see you already did this, but the light indicates that either the CPU isn't getting power (or not enough) or some other issue with detection. Do you have another power supply that you could try?
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom