- Dec 10, 2013
- 6
- 0
- 10,510
Hi! I've recently decided to make a new build out of components i left to the side after uppgrades.
I assembled the pc and everything went fine but when i try to install windows 7 it cuts to a blue screen with the reason: pfn_list_corrupt.
Pc specs:
ASUS P8H67-V (updated to the latest bios to support skylake processors.)
Intel® Core™ i5-3570K
Kingston HyperX 1600mhz 16gb DDR3 (set to 1333mhz in bios which is supported. not sure about the voltage or timings just left it on auto.)
Gigabyte GeForce GTX 780 3GB OC Windforce rev2.0
EVGA SuperNOVA 750B
Segate 2tb 7200rpm HDD
WIndows 7 64 bit.
Things i've tried: Putting ACHI to ide instead.
Changing the memory mhz to 1333 which is the supported amount.
Dban on the hard drive.
I need help i have no clue what might be the issue.
Motherboard manual if someone asks:
https://www.asus.com/Motherboards/P8H67V/HelpDesk_Manual/
I assembled the pc and everything went fine but when i try to install windows 7 it cuts to a blue screen with the reason: pfn_list_corrupt.
Pc specs:
ASUS P8H67-V (updated to the latest bios to support skylake processors.)
Intel® Core™ i5-3570K
Kingston HyperX 1600mhz 16gb DDR3 (set to 1333mhz in bios which is supported. not sure about the voltage or timings just left it on auto.)
Gigabyte GeForce GTX 780 3GB OC Windforce rev2.0
EVGA SuperNOVA 750B
Segate 2tb 7200rpm HDD
WIndows 7 64 bit.
Things i've tried: Putting ACHI to ide instead.
Changing the memory mhz to 1333 which is the supported amount.
Dban on the hard drive.
I need help i have no clue what might be the issue.
Motherboard manual if someone asks:
https://www.asus.com/Motherboards/P8H67V/HelpDesk_Manual/
Facebook
Twitter
Instagram