USB Wifi Adapter Cannot Find Network
- Thread starter Sfer
- Start date
smorizio
Titan
- Jan 22, 2010
- 30,984
- 9
- 125,315
https://www.netgear.com/support/product/A6100#Software%20Version%201.0.0.32%20(Supports%20Win10)
make sure in the software both 2.4 and 5g is on on the usb wifi stick and on your router. on your router make sure it transmitting a ssid. and if it both 2.4 and 5g make sure both radios are on.
make sure in the software both 2.4 and 5g is on on the usb wifi stick and on your router. on your router make sure it transmitting a ssid. and if it both 2.4 and 5g make sure both radios are on.
So, here's my summary:
Router has 2.5 GHz and 5 GHz Wireless Modes (?)
The 2.5 Wireless Status:
Channel: Auto
Broadcast SSID: Enabled
Wireless Mode: Compatibility Mode (802.11b/g/n)
Radio: Enabled
The 5GHz Wireless Status:
Same settings as above except Wireless Mode is set to N and AC Mode(802.11n/ac)
------------------------------------
My Adapter's Wireless Mode Setting is currently set at 802.11b/g/n.
However, other choices include the following:
Auto (this was the default setting before I changed it)
802.11ac
802.11a
802.11a/n
802.11a/n/ac
802.11b
802.11b/g
Router has 2.5 GHz and 5 GHz Wireless Modes (?)
The 2.5 Wireless Status:
Channel: Auto
Broadcast SSID: Enabled
Wireless Mode: Compatibility Mode (802.11b/g/n)
Radio: Enabled
The 5GHz Wireless Status:
Same settings as above except Wireless Mode is set to N and AC Mode(802.11n/ac)
------------------------------------
My Adapter's Wireless Mode Setting is currently set at 802.11b/g/n.
However, other choices include the following:
Auto (this was the default setting before I changed it)
802.11ac
802.11a
802.11a/n
802.11a/n/ac
802.11b
802.11b/g
Facebook
Twitter
Instagram