Cooler for a Intel Q9550S with Intel DG45ID motherboard

NascarNSX · Sep 5, 2017

Hello Everyone

I am looking for a CPU cooler that fits for this socket and this motherboard. My rig is old and I would like to change it soon, however real life not always going as you plan it. My Intel stock cooler is not cooling enough anymore and instead of changing the paste, I would like to buy a new cooler.

The problem for me is, this motherboard has way to big cooling radiators(?) on it, so I dont know what would fit on it. pic of the radiator:
http://www.pcstats.com/articleimages/200904/IntelG45ref_cool.jpg

So here I am to ask you guys for a cooler that is around 30-45 euros (or less would be better), and is a quality cooler.

Thank you for the answers

eie1646 · Sep 5, 2017

Hi NASCAR I would be glade that if I could help you According to my knowledge you are using a stock model of block air radiator type cooler. I guess it is so, these type of cooler are good for lower end type of processors such as dual core or pentium. But as you develop or upgrade your processor the amount of heat generated from it also increases at a very rapaid rate so it may work but I am sure that it will blow your processor for that size that you have mentioned in the picture it quite difficult to find a cooler with a fan type arrangement so if you have interest and lot of pocket money to spend then you can go with liquid cooler...
Or else get a good air cooler from you local IT store make a temporary arrangement so that it can hold it on the sink and use it...

hope you like my answer just don't forget to give a rating.
Akhil

NascarNSX · Sep 5, 2017

I see. Yeah this is what I have at the moment: http://www.index.hr/oglasi/UserDocsImages/oglas/_2016/2/11/276189/hladnjak-procesora-socket-775-slika-51422726-110220162356167684.jpg?preset=oglas-slike-view-detaljnoGalOpen2

Hmmm. I am not sure if I am up for liquid cooler as in my next rig, I am for sure gonna go with Cryorig R1, so this is bad news then.

GhislainG · Sep 5, 2017

A Cooler Master TX3 Evo will fit while providing better cooling. A Q9550S is a 65W CPU that's easy to cool.

NascarNSX · Sep 5, 2017

GhislainG :

According to this post the Hyper 103 is better than TX3 Evo. Do you think 103 would fit as well? And thank you so much for your answer!

GhislainG · Sep 5, 2017

According to pcpartpicker most coolers are compatible, but I have some doubts. You may need to measure because the width is 4.3 instead of 3.5 inches; therefore it will be .4" closer to the heatsink. Check the distance from the middle of the stock cooler to the tall heatsink.

The TX3 Evo can be mounted like the stock cooler (pushpins); the Hyper 103 requires a back plate.

NascarNSX · Sep 5, 2017

I have picked the best answer. After seeing the charts the TX3 Evo is not too far from the Hyper 103. At this stage any cooler will help me out, so I have ordered a TX3 EVO. Thank you for your help.

GhislainG · Sep 5, 2017

The TX3 Evo can cool my 84W i5-4590; therefore it will easily cool your 65W CPU. I chose the TX3 Evo because my case doesn't have a CPU cutout and I didn't want to remove the motherboard from the case to replace the stock cooler.

Search

Cooler for a Intel Q9550S with Intel DG45ID motherboard

NascarNSX

Commendable

GhislainG

eie1646

Prominent

NascarNSX

Commendable

GhislainG

Titan

NascarNSX

Commendable

GhislainG

Titan

NascarNSX

Commendable

GhislainG

Titan

TRENDING THREADS

Latest posts

Moderators online

Share this page