I'm planning to build a mini PC but I'm not sure of every piece will fit inside the tower. Please Help!

Case/Tower: https://www.amazon.com/Cooler-Master-Elite-130-Mini-ITX/dp/B00DJ6A88G.

Ram : https://www.amazon.com/Corsair-Vengeance-3000MHz-PC4-24000-Memory/dp/B0134EW7G8/ref=sr_1_7?s=electronics&ie=UTF8&qid=1504789988&sr=1-7&keywords=16%2Bgb%2Bram%2Bddr4&refinements=p_36%3A1253505011&th=1

Power Supply :https://www.newegg.com/Product/Product.aspx?Item=N82E16817139156

GPU: https://www.amazon.com/Gigabyte-GeForce-GDDR5-Windforce-GV-N1070WF2OC-8GD/dp/B01HHCA1IO/ref=pd_sim_147_1?_encoding=UTF8&pd_rd_i=B01HHCA1IO&pd_rd_r=HAK88BC6JFE55XQAYAQQ&pd_rd_w=wulW8&pd_rd_wg=NP8Md&psc=1&refRID=HAK88BC6JFE55XQAYAQQ or https://www.amazon.com/ROG-STRIX-GTX1080TI-O11G-GAMING-GeForce-DisplayPort-Overclocked-Graphics/dp/B06XXZBPHZ/ref=sr_1_3?s=electronics&ie=UTF8&qid=1504801852&sr=1-3&keywords=gtx+1080ti

MotherBoard: https://www.newegg.com/Product/Product.aspx?Item=N82E16813138452

CPU: https://www.amazon.com/AMD-Ryzen-1700X-Processor-YD170XBCAEWOF/dp/B06X3W9NGG/ref=sr_1_1?s=pc&ie=UTF8&qid=1504798835&sr=1-1&keywords=1700x or https://www.newegg.com/Product/Product.aspx?Item=N82E16819113434&cm_re=RYZEN_5-_-19-113-434-_-Product

Water Cooler: https://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&cm_re=liquid_cooling-_-35-181-010-_-Product

Hard Drive : https://www.amazon.com/Blue-Cache-Desktop-Drive-WD10EZEX/dp/B0088PUEPK/ref=sr_1_4?s=electronics&ie=UTF8&qid=1504802411&sr=1-4&keywords=hard+drive

I want a 4k Gaming experience, so this build will take me a long time to get, but I want to choose the right CPU is right for me. As for the GPU, I want to get the 1080 ti to get that 4k60 experience, however as for now I'm not planning to get that I will still continue to use my r9 280x for gaming for now because i dont care for playing in high in 30-40 fps in most games today with my GPU and I dont mind waitting, I just need to know if every piece will fit in nice and the gtx 1080 ti will fit just fine.
6 answers Last reply
More about planning build mini piece fit inside tower
  1. from the case company link you have max size for gpu also dont forget this case only have a 120 mm and a 80 mm fans in did you look at the ryzen 1600 for a cpu in this system it come with a cooler .
  2. scout_03 said:
    from the case company link you have max size for gpu also dont forget this case only have a 120 mm and a 80 mm fans in did you look at the ryzen 1600 for a cpu in this system it come with a cooler .

    I'm planning on overclocking too but too much that why i added a water cooler
  3. That 'water cooler' isn't going to cool any better than a decent air cooler will.
  4. Honestly stick with the ryzen 1600 & stock cooler.
    It'll do 4gbz at a push with decent case cooling if you get a good one & at least 3.7ghz if you don't.

    That's easily enough to push a 4k 60htz screen (it is at stock in all honesty)

    The ryzen 7's need really beefy cooling past 3.8ghz , they're not ideal on that board or in an mitx case IMO.

    The 1600 suits your needs loads better & will save you a lot of money.
  5. BTW the thermal take core v1 is a far better mitx case .


    Stick 2 low rpm 80mm fans in the rear & you're going to have a very very well ventilated system


    It also takes standard atx psu'seaning there's no need for an expensive SFX model.

    Stick a cx550m in there & you'll be good for $55.

Ask a new question

Read More

Overclocking Water Cooling Power Supplies PC gaming Mini PCs Build Your Own RAM CPUs AMD Build Motherboards Cases PC Builds Full-Tower New Build