Overclocked intigrated graphics too much

Toggle sidebar Toggle sidebar
Solution
R
Clearing CMOS Settings

The CMOS contains the current BIOS settings

Turn off the computer and disconnect the power cable from the electrical outlet.

Remove the computer cover.

Locate the 2-pin password connector (PSWD) on the system board.

Remove the 2-pin jumper plug.

Locate the 2-pin CMOS jumper (RTCRST) on the system board.

Move the 2-pin jumper plug from the password jumper to pins into the CMOS jumper.

Plug in AC power to the system and wait ten seconds for the CMOS to clear.

Move the 2-pin jumper plug back to the password jumper.

Replace the computer cover.

Connect your computer and devices to electrical outlets, and turn them on.
Sort by date Sort by votes
R

r21g2017

Reputable
Apr 2, 2017
29
0
4,540
Clearing CMOS Settings

The CMOS contains the current BIOS settings

Turn off the computer and disconnect the power cable from the electrical outlet.

Remove the computer cover.

Locate the 2-pin password connector (PSWD) on the system board.

Remove the 2-pin jumper plug.

Locate the 2-pin CMOS jumper (RTCRST) on the system board.

Move the 2-pin jumper plug from the password jumper to pins into the CMOS jumper.

Plug in AC power to the system and wait ten seconds for the CMOS to clear.

Move the 2-pin jumper plug back to the password jumper.

Replace the computer cover.

Connect your computer and devices to electrical outlets, and turn them on.
 
Upvote 0 Downvote
Solution
R

Rookie_MIB

Distinguished
Jul 27, 2013
1,970
10
20,965
On the board, the clear cmos pins are on the bottom middle of the board (by the lowest PCI slot) Power off the computer, unplug it, and hit the power button to remove any stored energy in the capacitor. Take a screwdriver, short those two pins together for a few seconds. Plug the computer back in, and try to power it back up. See if it comes up.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom