ram compatibility question

Solution
Start with the rated speed, voltage, CL and CMD rate. Once you have it working slowly lower your CL (that list on numbers on the side of your ram that isn't the speed) starting with the CAS. One number at a time test it in memtest 86 (ideally)...for ballpark testing (ie geting it close before going memtest on it) Just boot into windows and play a game or something. see if it crashes. If it does turn the number back up. Also the CMD rate or T...is usually rate T2. See if you can get T1 to work. Its a very nice boost in performance.

atomicWAR

Glorious
Ambassador
You may have to enter the CL and speed manually...actually I encourage users to always do this. XMP is great if it works with your set up but only use it as a starting point for your CL and command rate. You should still always try to find the lowest timings/ command rate (T1 ideally) because that is where the biggest performance gains are to be had.

The OVL list is just the ram they tested exclusively. And yes it is best if you can get ram off the QVL but the old intel DDR3 boards, minus a handful of models that were AMD exclusive which yours is not one of those known offenders, generally work well with anything on the market. XMP may or may not work but again you want to set your timings/speed manually anyways. Your platform is old enough where you don't have to worry like folks with Ryzen need to because there platform is so new and has bugs that need ironing out. The 1150 socket is very very mature so you don't have to worry as much.
 

atomicWAR

Glorious
Ambassador
Start with the rated speed, voltage, CL and CMD rate. Once you have it working slowly lower your CL (that list on numbers on the side of your ram that isn't the speed) starting with the CAS. One number at a time test it in memtest 86 (ideally)...for ballpark testing (ie geting it close before going memtest on it) Just boot into windows and play a game or something. see if it crashes. If it does turn the number back up. Also the CMD rate or T...is usually rate T2. See if you can get T1 to work. Its a very nice boost in performance.
 
Solution

atomicWAR

Glorious
Ambassador

atomicWAR

Glorious
Ambassador
You can yes...just don't exceed 1.65V for memory or you risk damaging your CPU or at the least wearing it out quicker. Also some of the G.skill ares and a couple other ones don't play nice with intel. I really encourage the ones I listed. Especially the the trident X.
 

atomicWAR

Glorious
Ambassador
My CPU stock voltages is the same as yours. I have been running at 1.6V for 3 years+ now with zero issues at DDR3 2400mhz speeds. I got lucky mine was stable at the lower 1.6V though it is rated at 1.65V. Test it at both. You may get lower a CL at 1.65 then 1.6 but in my case it was the same for both so i just use the lower voltage since anything lower on the CL wasn't stable at 2400mhz.
 

atomicWAR

Glorious
Ambassador
Yeah you most likely can. You'll have to turn up your voltages and increase you CL timings (most likely 1.55-1.65V with CL of 10-11). Try auto CL timings to get it to work and find the ball park speeds your ram can do...then if it does see what auto set them to and try to lower the timings some until your system becomes unstable then ease back to where it was last stable. Takes a little time but is a quick way to get more performance out of your ram.
 

atomicWAR

Glorious
Ambassador


More stress on the memory controller. the fastest OC for ram is actually on one stick...each time you add a stick it stresses the memory controller on the CPU harder. The more sticks you add the less you can OC.
 

atomicWAR

Glorious
Ambassador
well depends on what you play. 4C/4T CPUs are starting to bottleneck games like BF1, Watch dogs 2, The Division, The Witcher 3, Ghost Recon Wildlands, GTA V, Rise of the Tomb Raider. That said if your not game streaming a solid 4C/8T drop in solution like the i7 4790K would add another 3-5 years to your platform. where as if you use well threaded games your i5 4690K is already hurting in some AAA games and in another year or 2...will be hurting in a lot of AAA games.